1. New Emulator

  2. Immo Bypass

  3. Julie Emulator

  4. AUTO CHIPS



Good or Bad Vas5054A
01-06-2019, 14:56 PM, (This post was last modified: 01-06-2019, 14:57 PM by sebastian_j.)
Post: #331
RE: Good or Bad Vas5054A
Does anyone have confirmed source of genuine OKI chip? Or maybe somebody bought for many smile ?
BTW, current on Ebay from Littlediode is a fake!
Quote this message in a reply
04-06-2019, 03:36 AM,
Post: #332
RE: Good or Bad Vas5054A
(01-06-2019, 14:56 PM)sebastian_j Wrote:  Does anyone have confirmed source of genuine OKI chip? Or maybe somebody bought for many smile ?  
BTW, current on Ebay from Littlediode is a fake!

OKI is useless, and your tool will never use it unless you have to diagnose an old Ford.

Not sure why the Chinese vendors focus on advertising just that, while there are much more important chips not done right.
Quote this message in a reply
04-06-2019, 11:32 AM,
Post: #333
RE: Good or Bad Vas5054A
That's truth, but I have replaced all other chips already and wanted to have 'almost' genuine interface wink
Seems like I have to give up at that point.
Quote this message in a reply
02-08-2019, 19:48 PM,
Post: #334
RE: Good or Bad Vas5054A
Hi friends

I wanted to start for the modification of the RAM Samsung, i have the impression that the VAS5054 ram during the diagnosis.

The Samsung K6X4016T3F-TF70 Ram is present on the board currently, operating feature: 3.3V and 70ns.
http://www.alldatasheet.com/datasheet-pd...-TF70.html

When i compare with the data of the Cypress CY7C1041D-10ZSXI i understand that it works on a range of 2 to 5 volts
https://html.alldatasheet.com/html-pdf/1...0ZSXI.html

Is it possible to use the Cypress instead of Samsung ?

Thank you in advance.
Quote this message in a reply
04-08-2019, 18:21 PM,
Post: #335
RE: Good or Bad Vas5054A
D version of that chip is not the same as B version this is why was not in the list of upgrades. Look back and find the rework pictures i put long time ago, zoom in and look ar ram models that are compatible.

If you like my post and it helped you please press [Image: postbit_reputation.gif] & [Image: tyl_add.png]
Quote this message in a reply
[-] The following 2 users say Thank You to fantomel for this post:
  • BS68, vipsha
07-08-2019, 11:36 AM,
Post: #336
RE: Good or Bad Vas5054A
Looking for a new 5054 to rework. my current one only has the 20mhz infineon chip.

Any links to reliable sources other than ali express etc
Quote this message in a reply
14-08-2019, 20:36 PM,
Post: #337
RE: Good or Bad Vas5054A
(07-08-2019, 11:36 AM)rhinopower Wrote:  Looking for a new 5054 to rework. my current one only has the 20mhz infineon chip.

Any links to reliable sources other than ali express etc

it is an issue among Chinese clones they cover cpu with some stickers just to cover the info...
I have ordered used geniune, but I plan to buy one spare clone for diagnostic, and to use oem just in case of flashing and other stuff...
still looking for one that has right things on right places even if it the chip is not ori

if someone has some links
Quote this message in a reply
06-09-2019, 16:25 PM,
Post: #338
RE: Good or Bad Vas5054A
How do I distinguish real from fake AMB2300 and OKI?
I would use the device for Passthru for Xentry
Will these china clones be ok for Passthru... nothing special just for use on my own car.
Quote this message in a reply
07-09-2019, 17:27 PM,
Post: #339
RE: Good or Bad Vas5054A
(06-09-2019, 16:25 PM)ALE009 Wrote:  How do I distinguish real from fake AMB2300  and OKI?
I would use the device for Passthru for Xentry
Will these china clones be ok for Passthru... nothing special just for use on my own car.

OKI doesn't matter and is useless.

Fake AMB2300 has zero capacitors or other SMD on the back of the bluetooth board.
Reputation: +1 - aka99 [+1]
Quote this message in a reply
[-] The following 1 user says Thank You to Enabled for this post:
  • ALE009
07-09-2019, 17:51 PM,
Post: #340
RE: Good or Bad Vas5054A
So basically AMB2300 is for bluetooth ? I don't care for bluetooth... Diagnostic and that all ok if fake AMB2300?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
ZVW Solved ✔ Cloned VAS5054A proper rewoks for working with D-PDU API 1.20.42 toza27 68 6,332 19 minutes ago
Last Post: pyzdraaaa
ZTAudi VAS5054A choose or not Savas 12 511 17-02-2020, 19:38 PM
Last Post: rightpcb
ZVW VAS5054A test Rik 5 787 16-02-2020, 16:53 PM
Last Post: bg17aw
  VAS5054A PCB Difference knabbels 269 65,501 02-02-2020, 09:41 AM
Last Post: toza27
ZVW ODIS 4.23 with old VAS5054A flashgorden2010 16 7,949 22-12-2019, 09:22 AM
Last Post: djklauss
  win10 and vas5054a aka99 15 2,763 06-12-2019, 15:19 PM
Last Post: keeseng89
  Solved ✔ VAS5054A missing resistor Patrik813 1 587 17-11-2019, 13:59 PM
Last Post: toza27
ZVW How to activate ACC on VW, VAS5054a? tehfalcon 9 1,126 15-11-2019, 00:31 AM
Last Post: deutsch
ZTAudi odis advise me for VAS5054A manueldord 0 186 11-11-2019, 10:15 AM
Last Post: manueldord
ZVW VAS5054A newest Clone with Odis S or E not working Bmw777 3 578 24-10-2019, 07:27 AM
Last Post: Zamperl

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content