Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Good or Bad Vas5054A
12-09-2017, 08:17 AM,
Post: #61
|
|||
|
|||
RE: Good or Bad Vas5054A
(12-09-2017, 08:15 AM)apoelistas Wrote: Finally arrived pictures are to small..... Don't PM me for SW keys, FRM, Licences, radio codes or similar, you will not get any answer...
|
|||
12-09-2017, 08:19 AM,
Post: #62
|
|||
|
|||
RE: Good or Bad Vas5054A
Take the shield off the amb to see whatis below. Also take a look underneath the amb board. I'll second the fact pics are too small.
|
|||
12-09-2017, 08:27 AM,
(This post was last modified: 12-09-2017, 08:36 AM by apoelistas.)
Post: #63
|
|||
|
|||
RE: Good or Bad Vas5054A
Picture links corrected please advice. What is the consequence of the 3 missing resistors (red square)?? Do these have to do with OKI or something else???
|
|||
12-09-2017, 08:34 AM,
Post: #64
|
|||
|
|||
RE: Good or Bad Vas5054A
(12-09-2017, 08:27 AM)apoelistas Wrote: Picture links corrected please advice. ?... these are "thumbnail" size, UPLOAD real size Don't PM me for SW keys, FRM, Licences, radio codes or similar, you will not get any answer...
|
|||
12-09-2017, 08:45 AM,
(This post was last modified: 12-09-2017, 11:13 AM by apoelistas.)
Post: #65
|
||||||||||
|
||||||||||
RE: Good or Bad Vas5054A
(12-09-2017, 08:34 AM)sixcode Wrote:(12-09-2017, 08:27 AM)apoelistas Wrote: Picture links corrected please advice. Is this ok? Probably I have to re-shoot the memory side with my wifes phone. I will not remove the memory chips however I will try to find 2 heatsinks for the memory before using. ordered 22x8x5mm copper heatsinks (hope they fit in the case)
|