Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Good or Bad Vas5054A
22-08-2018, 11:14 AM,
(This post was last modified: 22-08-2018, 11:17 AM by apoelistas.)
Post: #201
|
|||
|
|||
RE: Good or Bad Vas5054A
Hi
(21-08-2018, 16:25 PM)turp9 Wrote: Lets say with a miracle there is original AMB2300 chip. Is it possible to desolder that blue chip and replace it with original? Will it work or it needs other parts or different pcb to use it with clone vas? If you can find amb2300 by miracle then you need edicblue LP pcb made by softing AG. Better find China clone with original amb2300. Some exist but very scarce. |
|||
22-08-2018, 11:44 AM,
(This post was last modified: 22-08-2018, 11:45 AM by Bimmer540.)
Post: #202
|
|||
|
|||
RE: Good or Bad Vas5054A
(22-08-2018, 11:14 AM)apoelistas Wrote: Hi(21-08-2018, 16:25 PM)turp9 Wrote: Lets say with a miracle there is original AMB2300 chip. Is it possible to desolder that blue chip and replace it with original? Will it work or it needs other parts or different pcb to use it with clone vas? And an very old vas5054a that came with software v19 would it work with bt? |
|||
22-08-2018, 12:09 PM,
Post: #203
|
|||
|
|||
RE: Good or Bad Vas5054A
|
|||
22-08-2018, 13:33 PM,
Post: #204
|
|||
|
|||
RE: Good or Bad Vas5054A
(22-08-2018, 11:14 AM)apoelistas Wrote: If you can find amb2300 by miracle then you need edicblue LP pcb made by softing AG. Better find China clone with original amb2300. Some exist but very scarce.I found a small company who has a few original amb2300 in stock left.But only chip. Not the whole pcb for vas. |
|||
22-08-2018, 13:52 PM,
Post: #205
|
|||
|
|||
RE: Good or Bad Vas5054A
(22-08-2018, 12:09 PM)apoelistas Wrote:(22-08-2018, 11:44 AM)snypertje Wrote: And an very old vas5054a that came with software v19 would it work with bt?Do you have pcb photos?? Cannot answer otherwise. No pictures. I saw it online for sail with old software and seller guaranteed me that BT works 100%. I thought that the old VAS5054a always worked with BT? |
|||
22-08-2018, 16:50 PM,
(This post was last modified: 22-08-2018, 16:55 PM by apoelistas.)
Post: #206
|
|||
|
|||
RE: Good or Bad Vas5054A
(22-08-2018, 13:52 PM)snypertje Wrote:(22-08-2018, 12:09 PM)apoelistas Wrote:(22-08-2018, 11:44 AM)snypertje Wrote: And an very old vas5054a that came with software v19 would it work with bt?Do you have pcb photos?? Cannot answer otherwise. V19 is sp33-D which is inferior quality than sp33-C vas5054a. Does not support UDS protocol. I have sent a link for what I think is original amb2300. |
|||
22-08-2018, 17:01 PM,
Post: #207
|
|||
|
|||
RE: Good or Bad Vas5054A
(22-08-2018, 16:50 PM)apoelistas Wrote:(22-08-2018, 13:52 PM)snypertje Wrote:(22-08-2018, 12:09 PM)apoelistas Wrote:(22-08-2018, 11:44 AM)snypertje Wrote: And an very old vas5054a that came with software v19 would it work with bt?Do you have pcb photos?? Cannot answer otherwise. So v19 old VAS5054a does not work with BT? |
|||
22-08-2018, 18:15 PM,
(This post was last modified: 22-08-2018, 18:47 PM by apoelistas.)
Post: #208
|
|||
|
|||
RE: Good or Bad Vas5054A
|
|||
22-08-2018, 21:35 PM,
(This post was last modified: 22-08-2018, 21:48 PM by apoelistas.)
Post: #209
|
|||
|
|||
RE: Good or Bad Vas5054A
|
|||
23-08-2018, 06:53 AM,
Post: #210
|
|||
|
|||
RE: Good or Bad Vas5054A
(22-08-2018, 21:35 PM)apoelistas Wrote: After checking the sellers other items with vas5054a it's amb2300 board has no resistors at the back. On this bt board you can desolder fake and replace with original amb chip right? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content