Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Good or Bad Vas5054A
01-06-2019, 14:56 PM,
(This post was last modified: 01-06-2019, 14:57 PM by sebastian_j.)
Post: #331
|
|||
|
|||
RE: Good or Bad Vas5054A
Does anyone have confirmed source of genuine OKI chip? Or maybe somebody bought for many ?
BTW, current on Ebay from Littlediode is a fake! |
|||
04-06-2019, 03:36 AM,
Post: #332
|
|||
|
|||
RE: Good or Bad Vas5054A
(01-06-2019, 14:56 PM)sebastian_j Wrote: Does anyone have confirmed source of genuine OKI chip? Or maybe somebody bought for many ? OKI is useless, and your tool will never use it unless you have to diagnose an old Ford. Not sure why the Chinese vendors focus on advertising just that, while there are much more important chips not done right. |
|||
04-06-2019, 11:32 AM,
Post: #333
|
|||
|
|||
RE: Good or Bad Vas5054A
That's truth, but I have replaced all other chips already and wanted to have 'almost' genuine interface
Seems like I have to give up at that point. |
|||
02-08-2019, 19:48 PM,
Post: #334
|
|||
|
|||
RE: Good or Bad Vas5054A
Hi friends
I wanted to start for the modification of the RAM Samsung, i have the impression that the VAS5054 ram during the diagnosis. The Samsung K6X4016T3F-TF70 Ram is present on the board currently, operating feature: 3.3V and 70ns. http://www.alldatasheet.com/datasheet-pd...-TF70.html When i compare with the data of the Cypress CY7C1041D-10ZSXI i understand that it works on a range of 2 to 5 volts https://html.alldatasheet.com/html-pdf/1...0ZSXI.html Is it possible to use the Cypress instead of Samsung ? Thank you in advance. |
|||
04-08-2019, 18:21 PM,
Post: #335
|
|||
|
|||
RE: Good or Bad Vas5054A
D version of that chip is not the same as B version this is why was not in the list of upgrades. Look back and find the rework pictures i put long time ago, zoom in and look ar ram models that are compatible.
If you like my post and it helped you please press
|
|||
07-08-2019, 11:36 AM,
Post: #336
|
|||
|
|||
RE: Good or Bad Vas5054A
Looking for a new 5054 to rework. my current one only has the 20mhz infineon chip.
Any links to reliable sources other than ali express etc |
|||
14-08-2019, 20:36 PM,
Post: #337
|
|||
|
|||
RE: Good or Bad Vas5054A
(07-08-2019, 11:36 AM)rhinopower Wrote: Looking for a new 5054 to rework. my current one only has the 20mhz infineon chip. it is an issue among Chinese clones they cover cpu with some stickers just to cover the info... I have ordered used geniune, but I plan to buy one spare clone for diagnostic, and to use oem just in case of flashing and other stuff... still looking for one that has right things on right places even if it the chip is not ori if someone has some links |
|||
06-09-2019, 16:25 PM,
Post: #338
|
|||
|
|||
RE: Good or Bad Vas5054A
How do I distinguish real from fake AMB2300 and OKI?
I would use the device for Passthru for Xentry Will these china clones be ok for Passthru... nothing special just for use on my own car. |
|||
07-09-2019, 17:27 PM,
Post: #339
|
|||
|
|||
RE: Good or Bad Vas5054A
(06-09-2019, 16:25 PM)ALE009 Wrote: How do I distinguish real from fake AMB2300 and OKI? OKI doesn't matter and is useless. Fake AMB2300 has zero capacitors or other SMD on the back of the bluetooth board. |
|||
Reputation: +1 - aka99 [+1] | |||
07-09-2019, 17:51 PM,
Post: #340
|
|||
|
|||
RE: Good or Bad Vas5054A
So basically AMB2300 is for bluetooth ? I don't care for bluetooth... Diagnostic and that all ok if fake AMB2300?
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content