[Loliceman]

Make sure u have connected GPS antenna properly.. And check the coding on the unit.

[Fx82]

How does signatures certificate changes to accepted? Mine is rejected. Meaning what has to be done to achieve this?

[SweetBMW]

In what car? Mine are all accepted. Did you use the fscs certificate in esys or fstool?

[Fx82]

Sorry about that....F10.
I use this folder for signing the certs. 00_PRIVATEKEYS
If I check the status of scert e-sys gives" SIGS_CERT_NOT_EXISTENT

EDIT: I've managed to get it on "accepted" import fsc and all are stuck on status "brought in"
EDIT: All changed to rejected.

[SweetBMW]

I signed the fsc codes in templates with the fscs key in the private keys folder. THen in the cert directoey if esys input the fscs feet from feet folder. This worked and all are accepted. But Navi is grey.

[sebastianfernandes]

The only reason i can think the navi is still grey is that the the map code is generated with the previous 1B, you should try to generate code using the new 1b loaded from the template from this forum. Use BMW-FSC-NBT-WRAPPER Generator to generate code for the map update.. Here is the link
http://cartechnology.co.uk/showthread.ph...ht=aknight
Attached you will find latest lookup.xml
Try it and see if it works...

[SweetBMW]

I read the 1b with esys after loading the fsc to the Cic.

[jackylooo]

Intel123 and other contributors to the thread, thankyou for your hard work and guidance. However, I need your help.

I have a factory fit CIC and successfully flashed it using the USB stick to virginise the CIC. Using Diagnose Address 63, I can use SWT Develop to Store_Sig_cert, Store_FSCS_cert and Store_FSC, then Check_Sig_cert, Check_FSCS_cert and Check_FSC for 17, 19 and 9C. I used a K-DCAN Cable.

All FCS Templates were updated with my VIN with no errors.

The problem is that I cannot do this with 1B. Store gives error code [2090] and Check gives the error code [2020].

How do I Store and Check 1B? Without it my Navigation will not work

Thankyou. CW

What country of map you are loading? In the OP it said only ECE and US are supported.
Maybe that's another possible factor caused the NAVIGATION grey out...



從我的iPhone使用Tapatalk 發送

[syrus]

Sorry about that....F10.
I use this folder for signing the certs. 00_PRIVATEKEYS
If I check the status of scert e-sys gives" SIGS_CERT_NOT_EXISTENT

EDIT: I've managed to get it on "accepted" import fsc and all are stuck on status "brought in"
EDIT: All changed to rejected.

By ESYS > "FSC Extended"

after you load FSC Cert and the FSC into your car ... the status shows "brought_in"

now: check the status with: "Check FscCert" & "Check FSC" ... after that, the FSC and the Cert is accepted ...

---

I signed the fsc codes in templates with the fscs key in the private keys folder. THen in the cert directoey if esys input the fscs feet from feet folder. This worked and all are accepted. But Navi is grey.

You must load the NavigationMps over USB into your Car, enter the FscKey and after that, when t is finished with the upload, the CIC is rebooting and the Navigation is functionaly

[SweetBMW]

Sorry about that....F10.
I use this folder for signing the certs. 00_PRIVATEKEYS
If I check the status of scert e-sys gives" SIGS_CERT_NOT_EXISTENT

EDIT: I've managed to get it on "accepted" import fsc and all are stuck on status "brought in"
EDIT: All changed to rejected.

By ESYS > "FSC Extended"

after you load FSC Cert and the FSC into your car ... the status shows "brought_in"

now: check the status with: "Check FscCert" & "Check FSC" ... after that, the FSC and the Cert is accepted ...

---

I signed the fsc codes in templates with the fscs key in the private keys folder. THen in the cert directoey if esys input the fscs feet from feet folder. This worked and all are accepted. But Navi is grey.

You must load the NavigationMps over USB into your Car, enter the FscKey and after that, when t is finished with the upload, the CIC is rebooting and the Navigation is functionaly

Tried that. It's still grey.


Sent from my iPhone using Tapatalk