[fumantwo]

You should remove the script activator, to do it manually edit /etc/startl6sss.sh and remove second line "/mnt/EFS_RO/SWT_activate" or remove that file from system and script activation will be disabled. Also remove ans .swt files in /mnt/HBpersistence. After you did all that, you should follow the procedure. When you insert usb if it restarts afterwards you're good, if it wont something is wrong. You can look at console for output or if you dont have serial attached then cat /dev/ser1

Just to give a bit of feedback, if it would help ...

I had my cic with the las version without being script activated yet. Perform script activation with the first version, and as state, worked flawlessly.

Being a bit lazy, hehehe, did not connect to the cic to delete the script activation, plug the v2 and worked, after 10 seconds red screen and woke up.



Will try to first check fsc's with donor vin to update first once and then try to upload the fsc with my car vin.