[ClockW]

Intel123 and other contributors to the thread, thankyou for your hard work and guidance. However, I need your help.

I have a factory fit CIC and successfully flashed it using the USB stick to virginise the CIC. Using Diagnose Address 63, I can use SWT Develop to Store_Sig_cert, Store_FSCS_cert and Store_FSC, then Check_Sig_cert, Check_FSCS_cert and Check_FSC for 17, 19 and 9C. I used a K-DCAN Cable.

All FCS Templates were updated with my VIN with no errors.

The problem is that I cannot do this with 1B. Store gives error code [2090] and Check gives the error code [2020].

How do I Store and Check 1B? Without it my Navigation will not work

Thankyou. CW