[larrybml]

Hello, and first, many thanks for the work.
Can someone help me with some errors?
I have an F10 with retrofited CIC, and I wanted to do my own FSC's .
I could apply the scritp, CIC virginized, I open ESYS and edit FSC's, changed VIN, and signed them with fscs.der from PRIVATEKEY, then I loaded fscs.der from 02_CERTS to Esys/ settings/ FSC/ Cerificate, then I go to Comfort mode/ FSC , loaded fsc (already signed), loaded FA, and hit Upgrade FSC.
Some of them worked from start, but 00190001.fsc , 001B0001.fsc and 00170001.fsc are not accepted.
Now I have :
0x17
FSCStatus : Rejected
FSCCertStatus : accepted
0x19
FSCStatus : Rejected
FSCCertStatus : accepted
0x1B
FSCStatus : Rejected
FSCCertStatus : accepted
0x28
FSCStatus : Rejected
FSCCertStatus : not available
0x6F
FSCStatus : accpted
FSCCertStatus : accepted
0x9C
FSCStatus : accpted
FSCCertStatus : accepted
0x9B
FSCStatus : accpted
FSCCertStatus : accepted

So, what I did so far, I think that I did it right, because some of the FSC's are accepted, but what about the others? Where I'm doing wrong? Or what is the solution? All I can see in the thread was PM sent, so nowhere a real solution. Please help!!!

I just flashed again CIC, now another problem, USB patch doesn't apply any more, I mean that I insert the USB with copie_scr.sh and CIC doesn't reboot anymore.
In this moment I started flashing again CIC.
As my car never had navigation, it doesn't had ethernet connection from CIC to ZGW, I did the wiring and I think is working because CIC is flashed in 51 min, but I still can not access it via telnet or ftp to see if there are old FSC's still there.
So please intel123 do a USB solution for us, the ones with problems, USB solution for automatic delete old FSC's and install signed ones. I can sign them with Esys and your files, but could not load them.

Thank you very much in advance and help you will help us all.