[intel123]

Thank you for your answer ClockW,
But USB stick was applied first time, because CIC was already at the latest firmware, after flashing it again, USB stick doesn't want anymore to be applied, I mean it doesn't do anything when it is connected, and I can't load FSC's, not even the ones that worked at the first try (9C,9B,6F).
I don't have an working FSTOOL and I prefer Esys because it is simple. But I don't understand if I'm doing something wrong, or something else is not good.

Larry, I changed my post and added more information.

I may be wrong, but I think if you flash your CIC, it only changes the flash chip contents. I do not think it changes anything on your harddrive. My understanding is that Intel123's script and FSC codes are only applied to the data on your harddrive. However, Intel123 is the expert on this, so I would always listen to his advice first.

CW

You are wrong and info that you are giving is incorrect. Please dont speak about thing that you dont know for a fact even if you THINK its like that. Thinking and knowing are two different things and bad advices regarding this will end up in broken CIC