[jackylooo]

Intel123 and other contributors to the thread, thankyou for your hard work and guidance. However, I need your help.

I have a factory fit CIC and successfully flashed it using the USB stick to virginise the CIC. Using Diagnose Address 63, I can use SWT Develop to Store_Sig_cert, Store_FSCS_cert and Store_FSC, then Check_Sig_cert, Check_FSCS_cert and Check_FSC for 17, 19 and 9C. I used a K-DCAN Cable.

All FCS Templates were updated with my VIN with no errors.

The problem is that I cannot do this with 1B. Store gives error code [2090] and Check gives the error code [2020].

How do I Store and Check 1B? Without it my Navigation will not work

Thankyou. CW

What country of map you are loading? In the OP it said only ECE and US are supported.
Maybe that's another possible factor caused the NAVIGATION grey out...



從我的iPhone使用Tapatalk 發送