[sebastianfernandes]

Why does it not work? What does fsc status say?

I tried all versions of FSTOOL / Carserver / Dr Gini combos as read on this and FSTOOL thread and i can STORE everything (SIG CERT, FSCS CERT) but i run CHECK commands i get error 10848 or others (5 digit letters, not 4 digits with ECU communication or such). GET_STATUS and everything works when i try to read.

What i achieved max is got the Certs loaded and that's it when i do CHECK commands they appear again rejected.

Patching went fine, red screen 1 second, and reboot. I believe the patching didn't virginize the CIC correctly as i am not running C1A but C16.

---

Mine still doesn't work after applying the patch successfully. Does any one have the script to virginize CIC by USB glovebox ?

hi,
please.......

Thanks, i have this file but some dude on eBay shipped me the wrong DUB-E100 adapter , (the new one) so i've reordered the correct one B1 revision hence no access to CIC.

I don't have OBD ENET connected as my car is 2008 so i can use ENET cable.

There was some guy here that got from intel123 an autorun file which virginized CIC , this is what i'm looking for and i'm willing to pay some bucks to someone that can help.

Thanks

Hey i would like to help but you've to be more specific. Did you use SET VIN command in SWT DEVELOP before doing anything else? the error you're getting is car server installation error. Yours is a retrofit so can't use a Enet cable off the obd port instead why can't you just hookup an ethernet cable at the back of the quadlock of the cic. You can viginize the CIC by replacing general persistency swt controller with a virgin one and deleting and creating blank data01,data02,data03 files. I would suggest if you have dr ginni installation update your ediabas installation ecu folder with dr gini folder ecu. You will see that gini has made a folder called server in C:\ediabas\bin Copy it's contents and paste in c:\ecapps\carserver.
try it and see if it works..