[roberdlv]

hello friends, I wanted to ask you for help, I want to install nbt evo and atm in a f20 without tcb or combox, I have a wiring of atm for car with tcb, I wanted to know if this same wiring would be valid and add some more cable and some more antenna and ya which, can you help me? thanks advanced.

[rrdesign]

Hello guys,
Is there a plug to connect the TCB blue plug to in order to not unplug/cut/splice cables?
To do something like this:

This Adapter is build by a friend of mine. If someone is interessted in pls write me some message!

He Has no Version 2.0 where no cable Has to be wired throu the car simple Plug and Play!

[Uli_g]

Hello.
Got two questions, do You know where can i buy connectors for new atm module (oabr and two next to it) ? Do I also need to buy new pins for theese connectors and for oabr plug in new nbt evo? I’m going to go for it from Nbt hu.
If I code new nbt evo with vin from atm and it will be from x25 will I have in nbt evo animations with x3 or can I change it by coding? In my case for f31

1. I’ve found that oabr plug can be found here: https://www.te.com/usa-en/product-2141404-1.html
Can You tel me if can I buy it somewhere in Europe (especially in Poland would be nice)?
What are numbers of two other plugs in ATM module (connected to A331*2B and A331*3B)?

2. I’ve read on this forum that image of car in Nbt Evo can be change by coding so I think that problem is solved

Ok. I found all plugs. If sobebody will need it OABR plug is: 9299610, and two others for ATM module are: 6909052 for black one and 6909054 for white one. I found them used from Range Rover and fits perfectly

[Jartsa]

I have wired ATM to my EVO via ethernet, but cannot get ip from atm. I can read something off the atm module via canbus, but not ie. cps. ATM61_ETHERNET error comes when using esys. Esys sees the module tho.

[yoodog]

Managed to create a plug'n play harness from tcb to atm. The problem is the cafd of the atm was corrupted and I had to load it using my FA. Now when reading data I can see my VIN (ATM[my_vin]). Is there a way to find the donor VIN? And to properly initialize the connection, should tool32, esys, ista be used? I have a retrofitted EVO behind a filter (ATM emulator)

No there is no way, only if Bmw dealer will send a request to IREP to search vin via ICC-ID number history. No one will do it for you.

---

I have wired ATM to my EVO via ethernet, but cannot get ip from atm. I can read something off the atm module via canbus, but not ie. cps. ATM61_ETHERNET error comes when using esys. Esys sees the module tho.

it is only 2-3 wires for ethernet.... signal wires correctly connected and it will be ok. no the difficult part

---

Has anyone got white 4G ATM box working with id5/id6 retrofits? It seems that it's better option as it's support 4G. I believe GPS and GSM connections can be soldered directly to the ATM.

Black and White ATM both have 4g and wifi hot spots, there is no difference beside instal location and HW matching your car. 


I have white atm installed in the roof with all services including remote working. It is tricky to install, but most difficult part is finding active atm. 

I can get you full telematics under your vin and your contract if you had telematics with TCB - NBT

[Jartsa]

there is something wrong with my ATM then. Signal wires are connected correctly

[Jartsa]

Had to flash the atm...

[Jartsa]

Had to flash the atm... and now im looking for active atm ...

[Aleksandervanb]

I can get you full telematics under your vin and your contract if you had telematics with TCB - NBT
[/quote]

HI, i trying to get atm retrofin on my f11 lci, i have now retrofit evo id6 , can you help me get full telematics?
thanx in advance

[DayvG]

I can get you full telematics under your vin and your contract if you had telematics with TCB - NBT

HI, i trying to get atm retrofin on my f11 lci, i have now retrofit evo id6 , can you help me get full telematics?
thanx in advance
[/quote]

I just did this in my F10, repin TCB to ATM, swap eSim from TCB to ATM, reconnect in car, login to Connected Drive and all should work. Use NEWTIS or ISTA for wiring diagrams for repinning the connector from TCB to ATM. It’s quite an easy job.