Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
VCDS 17.8.1 MULTILANGUAGE FULL
05-02-2019, 18:06 PM,
Post: #391
|
|||
|
|||
RE: VCDS 17.8.1 MULTILANGUAGE FULL
|
|||
06-02-2019, 14:43 PM,
Post: #392
|
|||
|
|||
RE: VCDS 17.8.1 MULTILANGUAGE FULL
I don’t know this programmer, but it must be wired like this :
|
|||
07-02-2019, 12:31 PM,
Post: #393
|
|||
|
|||
RE: VCDS 17.8.1 MULTILANGUAGE FULL
|
|||
07-02-2019, 12:58 PM,
Post: #394
|
|||
|
|||
RE: VCDS 17.8.1 MULTILANGUAGE FULL
for the loader and all prog files, see Post: #381
|
|||
08-02-2019, 08:17 AM,
Post: #395
|
|||
|
|||
RE: VCDS 17.8.1 MULTILANGUAGE FULL
Hello
I have this vcds clone, and I need the schematics, if anyone has it, I'll be greatfull. It has FT232RL chip. other components appear clearly in pictures. |
|||
08-02-2019, 09:32 AM,
Post: #396
|
|||
|
|||
RE: VCDS 17.8.1 MULTILANGUAGE FULL
Hello friends Many thanks to Dtech for sharing.
I own the Hex V2 17.8.1 not flash as on the images, wanting to make a diagnosis on a Touareg 1st generation (2005) the autoscan to work well (less than 10 minutes). After a few failures i wanted to delete its failures using "clear errors" during the end of the removal the screen of the PC became black i did not know how to do, waited a few minutes but nothing to do the screen of the PC is to remain black. Finally i cut the contact and exit the cable of the port OBD2 After a test of starting the vehicle to start without problem on the PC, i have other softwares like VCP, Diagbox, Renolink and Wow. Is what is the cause of the problem? If you like, can you tell me what produces this black screen? Thank you so much. |
|||
09-02-2019, 08:51 AM,
(This post was last modified: 11-02-2019, 11:24 AM by lanman.)
Post: #397
|
|||
|
|||
RE: VCDS 17.8.1 MULTILANGUAGE FULL
Hello!! I bought a HEX-V2 cable from a Chinese site with FT232RQ and Atmega162 chip.
The CD was damaged and I cant use it. The dealer said that has 18.2 version. So I don't know where I can find the compatible VCDSLoader. It is possible to update to the latest 18.9? If yes how can I do this? I will attach some pictures. Thank you for all. |
|||
09-02-2019, 16:40 PM,
Post: #398
|
|||
|
|||
RE: VCDS 17.8.1 MULTILANGUAGE FULL
(09-02-2019, 08:51 AM)lanman Wrote: Hello!! I bought a HEX-V2 cable from a Chinese site with FT232RQ and Atmega162 chip. Hi lanman, I have the same card visible on the picture above, the only difference between the 2 is the chip CAN Last night i installed the software Kolimer V7.2 by USB simply. First i made an obd2 cable to power the target board. I cut a cable obd2 coter male and female, with the coter i solder the solder on pins 4-5 for GND or ground and 16 for + 12V to a adapter 220V to 12V 1A. Find and download Kolimer V 7.2, open the files, (install drivers) choose EEWright ...? or similar and open it, plug your card into USB and OBD2 with 12V adapter. verifier and flash directly After you have to open another file (i do not have the name in memory) it is a file to read the chip Atmega162 to confirm the flash and you will see version 1.95. You must open the VCDS program to update to 1.96 so your cable will be OK for different versions. I also do the same process with a map called AES mode and success. Thanks and respect to Kolimer for free sharing, men like Kolimer are rare. Desolate for the english of the translator all this talks to tell you what you can without problem, the version is 0x46. Good work. |
|||
10-02-2019, 17:53 PM,
(This post was last modified: 11-02-2019, 11:27 AM by lanman.)
Post: #399
|
|||
|
|||
RE: VCDS 17.8.1 MULTILANGUAGE FULL
Thank you so much for your reply BS68!!
I think it’s difficult for me to do all this because I don't have this experience. Do you have any guide like DIY with photos whit whole process? Do I have to purchase a USB programmer? Can you share some pictures from your update process and the obd2 cable? I found the version from my cable. Is 1.96 with bootloader enabled. Can I use VCDSLoader 7.2 with the latest 18.9 or i will lock my cable? |
|||
16-02-2019, 17:20 PM,
Post: #400
|
|||
|
|||
RE: VCDS 17.8.1 MULTILANGUAGE FULL
Hey, does somebody know this device?
can i flash it with kolimers over usb? Now i have the problem that it cant get recognized per usb unable to read config index 0 descriptor/start: |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
VCDS Atmega162 license Revoked FIX | Dubstu | 0 | 86 |
Yesterday, 06:14 AM Last Post: Dubstu |
|
frf to bin or full backup | matustn | 0 | 31 |
15-05-2024, 10:37 AM Last Post: matustn |
|
VCDS Loader (Modded) | jtanner | 5 | 434 |
06-05-2024, 18:24 PM Last Post: justdiag |
|
VCDS 23.11.0 + LOADER | benyclaudiu | 15 | 3,713 |
02-05-2024, 07:15 AM Last Post: koldplayer |
|
VIIPlusLoader-08.024.01-FULL Free for all | greenhorn | 1 | 1,588 |
22-04-2024, 19:13 PM Last Post: BIMMERSIMBA |
|
VCDS HEX V2 (china) | standaBMW | 0 | 306 |
19-04-2024, 11:32 AM Last Post: standaBMW |
|
NEW VCDS all EU language 23.03.1 | pitercie | 5 | 655 |
17-04-2024, 06:11 AM Last Post: Karlos777 |
|
Request: full VCDS scan Audi S3 2007/2008 | ries | 0 | 132 |
29-02-2024, 20:05 PM Last Post: ries |
|
MY VCDS COLLECTION - ALL YOU NEED I HOPE | fantomel | 77 | 63,317 |
25-02-2024, 11:34 AM Last Post: XuLeTZ |
|
76 PLA / 3C Lane Change - Errors on VCDS scanning only | spooky75 | 8 | 572 |
08-01-2024, 11:12 AM Last Post: spooky75 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content