Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

NBT EVO b140 Flashing fails with CheckMemoryhttp error
24-08-2017, 15:00 PM,
Post: #11
RE: NBT EVO b140 Flashing fails with CheckMemoryhttp error
Try to force this swfl
Through UDS
Or let me wipe it all over again!
Quote this message in a reply
24-08-2017, 18:07 PM,
Post: #12
RE: NBT EVO b140 Flashing fails with CheckMemoryhttp error
(24-08-2017, 15:00 PM)IZGOY Wrote:  Try to force this swfl
Through UDS
Or let me wipe it all over again!

Yes they forced it, and both the Russian and the Egyptian wiped it all couple of time, and instead of flash mode, there was a no signal screen, nth was present.

I am downloading 59.5V Pszdata, the oldest one i got, and i will ask you this time to do the process if you please of course

All my knowledge is free for exchange with valuable information
Sharing->Development
  • FSC Repair kits - FSC Retrofits and Conversions Service history
  • Secure Coding 2.0 Type Key, FA, SFA, LCS Switch, SecOc, EOS Tester bypass after SME/HV Replacement
  • NBT/EVO/EntryNav2/MGU
  • MGU Carplay/Android auto W/O Telematics/CP/Patching in Middle East and Northern Africa
  • Feature Installer codes B2B
  • DME VIN ISN Working Hours IMMO OFF File and Remote Service/SWIFTEC - MG1 MD1 IMMO OFF
  • (E,F,G) 7DCT - DKG - 8HP - 6HP - EGS7 ISN Reset
  • KAFAS4 Virgin and Patching Remote
  • CAS2/3/4 Full IMMO & LOCKSMITH Customization Dump & Remote
  • HUF5663_434Mhz NO REMOTE SIGNAL FIX
  • F&G Series Headlight Customization
Visit this user's website
Quote this message in a reply
24-08-2017, 20:02 PM,
Post: #13
RE: NBT EVO b140 Flashing fails with CheckMemoryhttp error
I had the same problem as you with NBT in F10 of 7/2012 production date.
I tried all ways to make NBT working again, but no luck...
I'm interested in this topic
Quote this message in a reply
24-08-2017, 21:10 PM,
Post: #14
RE: NBT EVO b140 Flashing fails with CheckMemoryhttp error
I have been struggling with the same problem on one of my HUs - it was open on the bench with the HDD attached but not DVD - didn't occur to me to put it back together until I read the earlier post.

I put it back together and successfully flashed it.

Email: [email protected]  Skype: [email protected]
HU Engineering Tool
MGU Engineering Tool - now with field update mode via Feature Installer.
Coding 2.0
Quote this message in a reply
[+] 2 users say Thank You to pshoey for this post
24-08-2017, 21:56 PM,
Post: #15
RE: NBT EVO b140 Flashing fails with CheckMemoryhttp error
(24-08-2017, 21:10 PM)pshoey Wrote:  I have been struggling with the same problem on one of my HUs - it was open on the bench with the HDD attached but not DVD - didn't occur to me to put it back together until I read the earlier post.

I put it back together and successfully flashed it.



i flash one EVO ID4 (mini couper) to BMW ID5 this not have DVD, and not problem´s in flash

Please, Press the Buttons [Image: postbit_thx.gif] and [Image: postbit_reputation.gif] if This post help or is usefull for you! Not is needed write just only thanks in Threads thumbsup
Quote this message in a reply
[+] 2 users say Thank You to ruben_17non for this post
24-08-2017, 21:58 PM, (This post was last modified: 24-08-2017, 22:24 PM by pshoey.)
Post: #16
NBT EVO b140 Flashing fails with CheckMemoryhttp error
Your unit is most likely coded to not have a DVD drive - there are several coding settings related to internal / external optical drives.

Actually thinking about this a little more, it is probably a flag in the adjust block that indicates whether the HWEL has an optical drive. Coding would potentially be erased during flashing.

Email: [email protected]  Skype: [email protected]
HU Engineering Tool
MGU Engineering Tool - now with field update mode via Feature Installer.
Coding 2.0
Quote this message in a reply
24-08-2017, 23:01 PM,
Post: #17
RE: NBT EVO b140 Flashing fails with CheckMemoryhttp error
(24-08-2017, 21:58 PM)pshoey Wrote:  Your unit is most likely coded to not have a DVD drive - there are several coding settings related to internal / external optical drives.

Actually thinking about this a little more, it is probably a flag in the adjust block that indicates whether the HWEL has an optical drive. Coding would potentially be erased during flashing.

yes, any options in code for DVD
but in my case when flash HWEL, is skipped necessary during ID5 flash, it flash as ID5 to standard ID5 with DVD, and not issues, (i check after flash, in fdl DVD is set as aktiv)

also i try with the evo of mini couper updated to id5 mount DVD lector from other EVO, and work fine.

[Image: x5_362448744r03.jpg]

Please, Press the Buttons [Image: postbit_thx.gif] and [Image: postbit_reputation.gif] if This post help or is usefull for you! Not is needed write just only thanks in Threads thumbsup
Quote this message in a reply
24-08-2017, 23:06 PM,
Post: #18
RE: NBT EVO b140 Flashing fails with CheckMemoryhttp error
Dunno what to tell you other than I had the same error as OP (multiple times) and after putting the unit back together, flashed first time.

Email: [email protected]  Skype: [email protected]
HU Engineering Tool
MGU Engineering Tool - now with field update mode via Feature Installer.
Coding 2.0
Quote this message in a reply
24-08-2017, 23:23 PM,
Post: #19
RE: NBT EVO b140 Flashing fails with CheckMemoryhttp error
(24-08-2017, 23:06 PM)pshoey Wrote:  Dunno what to tell you other than I had the same error as OP (multiple times) and after putting the unit back together, flashed first time.

Okay, I do not argue that, maybe the problem is solved as you say.
I just say, i flashed one unit without DVD, and a working, nothing more.

I only say it as curiosity, not as discussion.

Please, Press the Buttons [Image: postbit_thx.gif] and [Image: postbit_reputation.gif] if This post help or is usefull for you! Not is needed write just only thanks in Threads thumbsup
Quote this message in a reply
25-08-2017, 00:53 AM,
Post: #20
RE: NBT EVO b140 Flashing fails with CheckMemoryhttp error
Had this memory http check many times, always rescued. Few days ago flashed B240, failed at same error on swfl 0000271a, tried couple times with same result.
Strange thing is that on another day esys can't see HU at all, altought it response via tool32.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  BMW E83 A1 error - MRS: No message from DSC ... ivanp 31 1,317 1 hour ago
Last Post: ivanp
XZBMW Esys error message only on EPS. ''Failed to get CAFs for SWE'' arthur101 2 99 25-04-2024, 22:48 PM
Last Post: arthur101
  NBT Evo CAFD missing after coding error Mugga 13 607 24-04-2024, 22:47 PM
Last Post: Mugga
  BMW F20 ACSM4B internal error Pedrom92 4 147 21-04-2024, 21:54 PM
Last Post: Pedrom92
  Flashing hybrid cars with E-sys ravager 0 149 18-04-2024, 09:51 AM
Last Post: ravager
XZBMW Need help for an error. TibeRiuSca 1 83 18-04-2024, 05:19 AM
Last Post: cipi gutuie
  VO code RSE_HIGH_NBT2 error HU_man 3 162 12-04-2024, 07:08 AM
Last Post: Node
XZBMW Error by Ista ABL_DIT_AS6100_TRAMODE_RESET arcelik 18 631 08-04-2024, 19:58 PM
Last Post: Fatalix
XZBMW xdrive off with esys without error in dash dankocg 14 2,921 07-04-2024, 08:57 AM
Last Post: Fatalix
  Solved ✔ ICOM NEXT Error bmwcare 4 2,493 01-04-2024, 11:34 AM
Last Post: ivanp

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content