[raffy haddad]

Hi all
Read 18f6220 ok as PDF instructions

[beso]

Hi.today tried to read Mercedes VITO ezs 0l01y I tried to read eeprom not read

[daxxer]

VVDI PROG latest software version V4.5.5 update

v4.5.5 (2017-02-27)
* This version DON't need update firmware
* Fix some bugs *
+ Add VVDI PROG USER MUNUAL 4.5.5 version in Doc folder
+ Support operate software while opening the diagram
* Fix HC908AB32_FLASH,
HC908AS32A_FLASH,
HC908AS60A_FLASH,
HC908AZ32A_FLASH,
HC908AZ60A_FLASH,
HC908AZ60E_FLASH,
MC68HC908LJ24,
MC68HC908LK24 options
write FLASH error problem in <2-MCU>->
<MOTOROLA-MC69HC(9)08>
+ Add M35080-OLD-VERSION option in <1-EEPROM&FLASH>-><ST>
+ Add MC9S08SU8_UNSECURED,
MC9S08SU16_UNSECURED options
in <2-MCU>-><MOTOROLA-MC9S08>
+ Add MED17.5.20(TC1766) option
in <3-ECU>-><VOLKSWAGEN>
+ Add GRAND-CHEROKEE-IMMO(0L72A)
option
in <4-IMMOBILIZER>-><JEEP>
+ Add CS35(2016) option
in <5-DASHBORAD>-><CHANGAN>
+ Add TRUMPCHI-GA6(2015) option
in <5-DASHBORAD>-><GACMOTOR>
+ Add KG-MODULE-W221-OLD,
KG-MODULE-W221-NEW options
in <8-OTHER>-><BENZ>
+ Add F-SERIES-SZL-MODULE option
in <8-OTHER>-><BMW>
+ Add TRUCK-LOCK-MODULE(2014--)
option in <8-OTHER>-><JEEP>

Notes: please use latest software version,if not work/find bugs post here/PM to Samic

[BMWS1000RR]

Can someone from VVDI or others help me with the connection of the VVDI on the PCB of the BMW EWS4 module..

here is a picture of the connections on a EWS4 module.. what VVDI wires go in the corresponding color points in the picture? These are TMPro connection points, and labeled as

Orange
Blue
Red
White

On VVDI it is
Reset - Yellow
BKGD - Purple or Violet
VSSA - Black
VCC / VDDX3 - Red

can anyone help with this connection points on the PCB?

[raffy haddad]

The picture that you post belong to ews bike
And for now only tmpro can do it
This bike isn't a toy becarfull
If you own vvdi prog and you want read ews 4 there is a picture in connection diagram
And the purpose of tmpro only put colors to make it mistery
And it has a secure mcu
Do you know what mcu type in it ?

[BMWS1000RR]

The picture that you post belong to ews bike
And for now only tmpro can do it
This bike isn't a toy becarfull
If you own vvdi prog and you want read ews 4 there is a picture in connection diagram

I have owned my 15 S1000RR for 2 years already now. I know it quit well.

I know where I got the picture. And yes, it is the EWS4 module off the 15 S1000RR, but it is also on the K1200 and K1600 bikes too.

I can already CK and change most all aspects of the BMSX DME series. I can CK and change the KOMBI with the 160DQ0T chip.

Sami answered a PM back in November that the VVDI will do the 9S12G128 chip in secured mode. At the time however he did not have the PCB layout of the Bike series EWS4. I have an EWS4 module now with the cap removed. It is the same as the picture TMPro presents. So I need to know the wiring interface for the VVDI to at least try if it works or not. I dont care if I brick the EWS4 as it is a spare anyway to experiment on.

[raffy haddad]

Ok freind
I wanna ask you what you use to read bmsx ecu ?
Thanks

[autoraedarum]

Ok freind
I wanna ask you what you use to read bmsx ecu ?
Thanks

2015-2016 There is a 1797 processor inside.
I have read it with byteshooter, but can not do CS.

You can read it with MPPS or K-Tag.

[raffy haddad]

Is ktag clone can read it ?

[BMWS1000RR]

Both Ktag and MPPS can read a TriCore 1797...