Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
[TUTO] Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
13-01-2018, 16:12 PM,
(This post was last modified: 13-01-2018, 18:00 PM by Clusters.)
Post: #11
|
|||
|
|||
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
Hello, sorry, can you help me download the file that is in attach, i dont know the reason, but i cant download it.
if it is possible, can you send me the file via email Rule 5 : Do not post email addresses, website URLs, Skype, phone numbers .etc in Thread/Post or signatures. Thanks, Admin Thanks a lot! Happy new year!))) (30-09-2017, 07:42 AM)mrle9 Wrote: Hi , |
|||
13-01-2018, 20:41 PM,
(This post was last modified: 13-01-2018, 20:46 PM by Oski.)
Post: #12
|
|||
|
|||
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
@mrle9: what do you mean by writing "activate bit"? At the hex60 I have value 92 and hex61 value 5A
|
|||
16-01-2018, 19:50 PM,
(This post was last modified: 17-01-2018, 11:44 AM by mrle9.)
Post: #13
|
|||
|
|||
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
By activate bit i mean change binary code of bit from 0 to 1
but if you don't know what I mean the simple way is to use the program Hex Rechner linked in my file . - Download from the link i wrote in my file the program Hex Rechner V0.2 , - start it and put your hexa address (ex: 92) in the field Hex and after check boxes for the needed bit for activate function, - Do do the same for the second address for other function Bye Don't forget to add me and if I helped you
|
|||
16-01-2018, 20:08 PM,
Post: #14
|
|||
|
|||
Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
Thanks for that. Ill give it a try and post results.
Wysłane z iPhone za pomocą Tapatalk |
|||
17-01-2018, 19:34 PM,
Post: #15
|
|||
|
|||
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
Just tested it. Needle sweep works, laptimer doesn't. Changed values at 60 and 61 as described in your tutorial. When byte 5 in 60 is activated I get safe on the dash, and mileage goes up by 20.000miles.
|
|||
19-01-2018, 17:01 PM,
Post: #16
|
|||
|
|||
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
What is the part number of your dashboard ?
Is it a white FIS dashboard ? Don't forget to add me and if I helped you
|
|||
19-01-2018, 17:19 PM,
(This post was last modified: 19-01-2018, 17:25 PM by Oski.)
Post: #17
|
|||
|
|||
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
8P0 920 982 H (UK), white dash 2012. I can drop you my dump if you want.
|
|||
19-01-2018, 19:24 PM,
(This post was last modified: 20-01-2018, 08:47 AM by mrle9.)
Post: #18
|
|||
|
|||
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
Yes please post your dump and i will try tomorrow on my bench
EDIT: but I think something goes wrong and you didn't wrote fine your dump on the dash Don't forget to add me and if I helped you
|
|||
20-01-2018, 15:10 PM,
(This post was last modified: 20-01-2018, 15:40 PM by Oski.)
Post: #19
|
|||
|
|||
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
I just attached my ori dump. I increased value of cell 60 by hex20 and cell 61 by 4. Bit 5 = 32 dec/20hex, bit 2 = 4hex/dec
|