Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Flashed G11 - Kafas broken
15-10-2017, 07:38 AM,
Post: #1
|
|||
|
|||
Flashed G11 - Kafas broken
Hi, I flashed a G11 from integration 58 to 61, all went well except the Kafas, which failed to flash.
ISTA tried 3 times, I then tried E-SYS, tried ISTA again, disabled parallel programming in E-SYS, same thing. I tried to flash with E-SYS again with 59 data, same issue. Any idea how to recover this? Here is the error in E-SYS FlashTimingParameter, description=error: timeout, link=Physical request to ECU with address 0x5d> MCDDiagService<id=230900, job=com.bmw.psdz.jobs.common.MCD3_ActivateProgModeCascade, service=DSC - DiagnosticSessionControl, description=error: timeout, link=Physical request to ECU with address 0x5d> [] Activate programming mode was not successful for: ECUId:KAFAS4_0x5D [] ECUId:KAFAS4_0x5D not accessible cause could not be switched to parallel programming or coding mode [KAFAS4 - 5D] ECUId:KAFAS4_0x5D not accessible cause could not be switched to parallel programming or coding mode [] finalizeVehicleFlash started MCDDiagService<id=230900, job=com.bmw.psdz.jobs.common.MCD3_FinalizeVehicleFlash, service=DSC - DiagnosticSessionControl, description=error: timeout, link=Physical request to ECU with address 0x25> |
|||
15-10-2017, 09:36 AM,
Post: #2
|
|||
|
|||
RE: Flashed G11 - Kafas broken
Do you use an icom?
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
15-10-2017, 09:49 AM,
Post: #3
|
|||
|
|||
RE: Flashed G11 - Kafas broken
|
|||
15-10-2017, 19:51 PM,
Post: #4
|
|||
|
|||
RE: Flashed G11 - Kafas broken
Did you use a dhcp mode?
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
15-10-2017, 23:06 PM,
Post: #5
|
|||
|
|||
RE: Flashed G11 - Kafas broken
|
|||
16-10-2017, 05:35 AM,
Post: #6
|
|||
|
|||
RE: Flashed G11 - Kafas broken
Run the connection through a router. ICOM or ENET cable to router, router to computer.
|
|||
16-10-2017, 06:46 AM,
Post: #7
|
|||
|
|||
RE: Flashed G11 - Kafas broken
Hello!
Or the simple method - flash it again with an enet cable, not with the ICOM. CU Oliver |
|||
16-10-2017, 08:09 AM,
Post: #8
|
|||
|
|||
RE: Flashed G11 - Kafas broken
During vehicle management, one of the following Ethernet-capable control units should be programmed:HU-H, RSE, ATM, KOMBI, ACC, ICAM, KAFAS
At the start of the session, a note appears indicating that the IP address is invalid. The Ethernet programming can fail if the following steps are not followed: Model series affected: All F, G, I Series Measure/workaround: 1. Finish ISTA(P) session 2. Carry out a battery reset 3. Restart the session 4. If the fault message continues to appear: Check that the Ethernet wiring in the vehicle corresponds to the wiring diagram in ISTA 5. If the fault message continues to appear: Contact Technical Support Fault corrected by: Currently still open Affected application: ISTA/P ISTA 4 |
|||
16-10-2017, 13:48 PM,
(This post was last modified: 16-10-2017, 13:51 PM by bmwcoder75.)
Post: #9
|
|||
|
|||
RE: Flashed G11 - Kafas broken
(16-10-2017, 06:46 AM)milkyway Wrote: Hello! I did with E-SYS, same issue (16-10-2017, 08:09 AM)myfirst1er Wrote: During vehicle management, one of the following Ethernet-capable control units should be programmed:HU-H, RSE, ATM, KOMBI, ACC, ICAM, KAFAS I did not have any error message Never seen that one |
|||
16-10-2017, 15:45 PM,
Post: #10
|
|||
|
|||
RE: Flashed G11 - Kafas broken
(15-10-2017, 23:06 PM)bmwcoder75 Wrote:(15-10-2017, 19:51 PM)Fx82 Wrote: Did you use a dhcp mode? Great! Now it is time for a change....yes you can MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Request KAFAS FSC repair pack | miru75 | 75 | 9,158 |
15-05-2024, 17:01 PM Last Post: XALLECS |
|
Kafas issue aftrer ACC Retrofit | It3_Magic | 14 | 721 |
23-04-2024, 07:44 AM Last Post: It3_Magic |
|
broken fsc 130 in entrynav2 | Wojti77 | 5 | 303 |
04-04-2024, 11:44 AM Last Post: Wojti77 |
|
NBT ID3 screen on ID4 flashed to ID6 | Driss2 | 2 | 263 |
27-03-2024, 11:46 AM Last Post: RuleNormaliai |
|
Broken CIC stuck in bootloop | painsage | 5 | 336 |
28-02-2024, 17:13 PM Last Post: Chillmeister |
|
KAFAS models knowledge roundup | anstr | 8 | 659 |
06-02-2024, 18:54 PM Last Post: jb2005 |
|
Speed limit information on G cars with one kafas | pcp1234 | 1 | 264 |
27-01-2024, 18:35 PM Last Post: dasi |
|
FSC for Kafas 4 11F OEM Or Patch | cupra80 | 2 | 480 |
21-11-2023, 11:02 AM Last Post: Wojti77 |
|
F44 EGS broken | qbek90 | 3 | 383 |
05-11-2023, 19:34 PM Last Post: DEJMIEN |
|
Solved ✔ Kafas 2 flash | Jalami | 4 | 389 |
05-11-2023, 18:12 PM Last Post: Jalami |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content