Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Black screen after flashing ID4 to ID5
09-01-2018, 21:23 PM,
Post: #11
|
|||
|
|||
RE: Black screen after flashing ID4 to ID5
Pls keep us posted
(09-01-2018, 18:37 PM)bmwcoder75 Wrote:(09-01-2018, 18:21 PM)DJ_B4L Wrote: I know its related to having 2gb ram |
|||
09-01-2018, 21:35 PM,
Post: #12
|
|||
|
|||
RE: Black screen after flashing ID4 to ID5
Oh well did not work
Had to reflash after running scripts. Uploaded ECE CAFD but still black screen. Same issue. FDL coding works fine. Using original USA FA/VIN matching radio it won't even code at all. Removed half the fancy options including 609 etc, still getting that stupid "Service WDBI_PLAIN returned a negative response error..." |
|||
09-01-2018, 21:42 PM,
Post: #13
|
|||
|
|||
RE: Black screen after flashing ID4 to ID5
Bad, seem same situation like I have had
(09-01-2018, 21:35 PM)bmwcoder75 Wrote: Oh well did not work |
|||
27-01-2018, 15:06 PM,
Post: #14
|
|||
|
|||
RE: Black screen after flashing ID4 to ID5
Bump.
have you found solution? |
|||
27-01-2018, 20:28 PM,
Post: #15
|
|||
|
|||
RE: Black screen after flashing ID4 to ID5
|
|||
27-01-2018, 22:12 PM,
Post: #16
|
|||
|
|||
RE: Black screen after flashing ID4 to ID5
For me region BIN working good, just hoped for cheaper solution
|
|||
28-01-2018, 00:37 AM,
(This post was last modified: 28-01-2018, 00:37 AM by jackylooo.)
Post: #17
|
|||
|
|||
Black screen after flashing ID4 to ID5
The similar symptoms I had seen is that US NBT would enter transport mode when it running outside US region, this is where the black screen can from, you may light up the screen again by manually dismiss the transport mode.
Not sure if this is same situation you had encountered though. |
|||
28-01-2018, 14:57 PM,
Post: #18
|
|||
|
|||
RE: Black screen after flashing ID4 to ID5
Hi you should try setting the DVD region parameter to any area, you will not have the WDBI_PLAIN error anymore
|
|||
28-01-2018, 15:58 PM,
(This post was last modified: 28-01-2018, 16:00 PM by BMWdriva.)
Post: #19
|
|||
|
|||
RE: Black screen after flashing ID4 to ID5
After the firmware under ID5, the standard means to coding telematics from ATM is not possible due to the (Sanity)hardware
It can be coded not by regular means (most are not available),like everything works but other problems arise - lack of RAM, etc., as a result of this constant rebuilding of the NBTevo. If we consider the NBTEVO line that go under ID5 (c 07/2016) For telematics another block with increased RAM is used. If NBTEvo has already been installed on the machine from the factory and has ID4, then it's just not worth it to pour thoughtlessly. You can get a few unpleasant surprises. For example, lose traffic jams and telematics , and with navigation will have to abandon the original codes VIM HU_MGU-instruction for esys.
BMW FSC map update/CIC/NBT/NBTevo/EntryNav(Route) BMW FSC retrofit full set: CIC/NBT/NBTevo id4/5/6 screen mirroring Changing region map for EVO id 4/5/6+FullScreen apple carplay |
|||
28-01-2018, 16:25 PM,
Post: #20
|
|||
|
|||
RE: Black screen after flashing ID4 to ID5
We are not talking about ID4>ID5 problem, but about US>ECE problem,
after patch it working good, so its not a HW problem |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
F20 LCI2 black panel cluster coding | sqorpius | 10 | 2,111 |
27-04-2024, 06:51 AM Last Post: hamzettin |
|
APIX1 black screen fix for 23-07 EVO HW2.3 | superwofy | 22 | 1,848 |
24-04-2024, 06:29 AM Last Post: sambir |
|
Flashing hybrid cars with E-sys | ravager | 0 | 166 |
18-04-2024, 09:51 AM Last Post: ravager |
|
Screen Mirroring not working on EVO | painsage | 5 | 310 |
10-04-2024, 15:05 PM Last Post: painsage |
|
NBT ID3 screen on ID4 flashed to ID6 | Driss2 | 2 | 241 |
27-03-2024, 11:46 AM Last Post: RuleNormaliai |
|
Flashing a stock box map to an E60 with XHP? | GoNz0- | 10 | 436 |
20-03-2024, 09:33 AM Last Post: tomaxsas |
|
flashing modules hw-id | redog4dy | 5 | 356 |
04-03-2024, 13:26 PM Last Post: redog4dy |
|
Power supply for coding flashing | kklobo | 14 | 984 |
29-02-2024, 08:37 AM Last Post: nBlacky |
|
BMW F25 screen change | m4rrtin | 1 | 180 |
25-02-2024, 19:36 PM Last Post: Bakica |
|
APIX1 screen with touch ? | oros | 1 | 209 |
25-02-2024, 19:03 PM Last Post: zero9 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content