[grh372]

I am here in the united states. Purchased the lights from the UK. when we connect them into our cars that already have led lights, we have an Issue. we have is unlike the UK that has a seperate turn signal and brake light leds. Our turn signals and brake lights are the same on these lights.
Theres not much coding going on here in the united states. I need to hire someone to code these lights to fix them. to get them working. Theres a few of us having this issue so far. the horizontal line is the turn signal and the verticle line is the brake in the UK.

...with FDL Coding the 3 new LEDs no problem: disabling BL/BFD/FRA Warm/Kaltueberwachung and setting the three to LED. Now only RFL is in LED. But if BMW is updating the BDC_BODY ECU the settings are deleted and you must reset this. Changing FA is not so good because system of dealer recognize a wrong FA and disables work.

You can use modified FA to push FDL changes without modifying VO in VCM.

...and tester of Dealer refuse work when FA not same as in BMW system saved to Cars VIN. The same work if coding FDL or by FA not written in VCM.

LG Thomas