Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW G30 Retrofit ICAM
20-06-2018, 10:55 AM,
(This post was last modified: 20-06-2018, 12:16 PM by ultimate.)
Post: #1
|
|||
|
|||
BMW G30 Retrofit ICAM
Hello
simple media (hu-b) has been replaced by nbtevo (hu-h) and retrofiting rear view camera ecu trsvc (aka icam) in the tree-ecu is (green) icam, hu, pma - coded camera icon when "power"(rear drive) is but image is not displayed and the test image is not displayed Errors - CD0600 and E1C600 disconnection Ithernet ZGM (ZGW) and HU connector oabr sends greetings or what did not finish? ithernet is checked HU to BDC, the connection is made according to scheme ecu camera (icam) in tree-ecu is - ithernet see icam, correctly think? break connection Internet HU-BDC i think OABR or something else? |
|||
20-06-2018, 21:45 PM,
Post: #2
|
|||
|
|||
RE: BMW G30 Retrofit ICAM
(20-06-2018, 10:55 AM)ultimate Wrote: Hello Hello, try to change camera ecu type from trsvc to icam in hu_nbt. greets |
|||
21-06-2018, 05:04 AM,
Post: #3
|
|||
|
|||
RE: BMW G30 Retrofit ICAM
Hi
HU_NBT_EVO > EXBOX 3001 > CAM_ECU = wert_25 HU_NBT_EVO > EXBOX 3001 > CAMERA_SYSTEM = icam2_rvc HU_NBT_EVO > EXBOX 3001 > ICAM2_HELLIGKEIT_KONTRAST = aktiv HU_NBT_EVO > EXBOX 3001 > MACRO_RV_C = aktiv TRSVC - aka ICAM in REINGOLD\ISTA (always displays and when rear view camera 3AG and when cameras 5DM and 5DN) E_Sys ICAM4 for G-ser |
|||
21-06-2018, 08:38 AM,
Post: #4
|
|||
|
|||
RE: BMW G30 Retrofit ICAM
If I look at the wiring diagrams, I can see the Icam is pluged to BDC and you haven´t wrote you coded this also, or have you?
|
|||
21-06-2018, 11:31 AM,
Post: #5
|
|||
|
|||
RE: BMW G30 Retrofit ICAM
(21-06-2018, 08:38 AM)gt678 Wrote: If I look at the wiring diagrams, I can see the Icam is pluged to BDC and you haven´t wrote you coded this also, or have you? Hi when retrofit rear view camera (3AG) nothing changes in the BDC Ithernet-bus BDC-HU not changes - only connection changes (pins) but i all the same coded BDC |
|||
21-06-2018, 13:52 PM,
Post: #6
|
|||
|
|||
RE: BMW G30 Retrofit ICAM
Hm, an other idea, because these days I had similar Problems with a F20 from 2018, if you calculate the SVT_soll does he want the BDC to be exchanged?
I want your car working, because a customer of me also wants a RVC in his G30 |
|||
22-06-2018, 17:30 PM,
Post: #7
|
|||
|
|||
RE: BMW G30 Retrofit ICAM
(21-06-2018, 13:52 PM)gt678 Wrote: Hm, an other idea, because these days I had similar Problems with a F20 from 2018, if you calculate the SVT_soll does he want the BDC to be exchanged? Hi thanks auto 11.2017 camera same year and cafd was in the right range when coding the BDC with 3AG option, nothing changes the Ithernet-Bus between BDC-HU remains physically only the connection (PINS) changes error - break Ithernet-Bus BDC-HU(NBT EVO) if i put back (with pins changes) HU-B (ENTRY EVO) there are no errors on Ithernet-Bus as if NBT EVO break OABR connector i do not know what to think found CAFD from BDC and NBT EVO from auto with 3AG everything i need is same(кивать головой) |
|||
06-07-2018, 10:46 AM,
Post: #8
|
|||
|
|||
RE: BMW G30 Retrofit ICAM
Anything new, is it working?
|
|||
30-11-2018, 15:06 PM,
Post: #9
|
|||
|
|||
RE: BMW G30 Retrofit ICAM
Is the quality of the latest ICAM camera better than the previous ones - say on F models 2015-2016 cars? Someone who drove the latest X3 model said it appeared like a UHD camera as compared to his previous F06 2015 model. Are these UDH or just better than previous rear view camera - RESOLUTION wise and when put into practical use?
|
|||
04-07-2022, 16:20 PM,
Post: #10
|
|||
|
|||
RE: BMW G30 Retrofit ICAM
I will bring this thread back to life because I have similar problem.
G30 with retrofitted NBT EVO and now I have retrofitted ICAM4. Everything is connected as it should be according to schemes. Ethernet from camera and from HU-H directly to BDC. There is no Ethernet Switch in car. There is no image from camera in PDC screen, and I can't select assting lines. I have flashed whole car but I cant update the HU because of strange errors with switching into programming mode. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
G21 paddles retrofit | bm92 | 2 | 88 |
9 hours ago Last Post: Node |
|
Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,477 |
26-04-2024, 08:06 AM Last Post: smilo |
|
Kafas issue aftrer ACC Retrofit | It3_Magic | 14 | 636 |
23-04-2024, 07:44 AM Last Post: It3_Magic |
|
G82 rear tail lights CSL retrofit | Sauron | 10 | 803 |
20-04-2024, 07:35 AM Last Post: SANYA |
|
BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS | intel123 | 891 | 468,196 |
20-04-2024, 01:05 AM Last Post: fe7565 |
|
Neck warmer retrofit | Just2fast5 | 5 | 399 |
17-04-2024, 11:20 AM Last Post: Spirit5676 |
|
ID4 evo to ID6 Evo full retrofit, ATM issues 03178A | mitch32 | 1 | 199 |
15-04-2024, 17:52 PM Last Post: mitch32 |
|
BMW E84 Cruise control retrofit not workig | Alyn546 | 4 | 228 |
12-04-2024, 14:23 PM Last Post: DieStream |
|
F10 FLA retrofit | beng2k | 30 | 1,063 |
11-04-2024, 18:43 PM Last Post: beng2k |
|
BMW f20 KOMBI2 retrofit | bm92 | 15 | 530 |
10-04-2024, 07:51 AM Last Post: bm92 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content