[consigliere3]

Hello to all,

I have problem with C3 Mux connection Im doing it first time, set com port to Port 2, Mux is show up in the list accesable but still I cen not to establish connection please help.

[consigliere3]

In the Taskbar icon is SDConnect C4 not C3 multiplexer, maybe it is the problem, but how to fix it?

[Rik]

For old C3 (Part D) you need COM port settings like:
Navigate to:
Control panel > System > Hardware > Device manager > Ports (COM & LPT). Right click on that COM port you have left enabled and select Properties.
Go to Port Settings tab and set these values:
Bits per second: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: None
Then click on Advanced... button and make sure Use FIFO buffers are checked and COM Port Number is set to COM2.
Press OK and close Device manager.

---

In the Taskbar icon is SDConnect C4 not C3 multiplexer, maybe it is the problem, but how to fix it?

My taskbar icon is with C3 Part D but when connect to a car change to SD4 icon.

[bkone]

If i connect the C3 it works bud not shown The right icon in the taskbar. Only show c4 icon also not availeble in the connection settings. Checking port Settings so many times are allready ok. The Selftest in Sd Toolkit dont work.
Sometimes DAS will freeze after working 10 minutes.

TNX in Advance

[bkone]

For old C3 (Part D) you need COM port settings like:
Navigate to:
Control panel > System > Hardware > Device manager > Ports (COM & LPT). Right click on that COM port you have left enabled and select Properties.
Go to Port Settings tab and set these values:
Bits per second: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: None
Then click on Advanced... button and make sure Use FIFO buffers are checked and COM Port Number is set to COM2.
Press OK and close Device manager.

---

In the Taskbar icon is SDConnect C4 not C3 multiplexer, maybe it is the problem, but how to fix it?

My taskbar icon is with C3 Part D but when connect to a car change to SD4 icon.

I give THX and Rep so Help me please.