[coskunhc]

Add 2TB to VO, recode.. thats it

Unfortunately no changes. Still doesn't work ):

---

Now my volume up/down and phone and mode button on steering wheel stopped working and the paddle shifters doesn't work.

Anyone have an idea what is wrong?

[coskunhc]

Don't code FDL, but VO code entire vehicle. Right click on SVT and Code. It will do the trick...

I have coded the FEM_body, Kombi, Egs, icm. Do you think that I need to code everything?

But how about my Vehicle order? Don't I need to add in a code to tell the car that I have installed a new M steering wheel paddle shifters?

Simply not do FDL code, but VO code. 2TB it's enough and your VO it's fine. After coding all SVT do hard reset from transmitter then clear all dtc.

How do I make the hard reset? And does that effect my chip tuning?

[duckdonald]

you must add the connect cable between SZL and FEM.
Pin 3 to pin 5.

You can also code it in FDL, it does not matter. the enabling of the paddlets is only a parameter of the FEM

[coskunhc]

you must add the connect cable between SZL and FEM.
Pin 3 to pin 5.

You can also code it in FDL, it does not matter. the enabling of the paddlets is only a parameter of the FEM

That cable is already wired in my car. I have checked the fem module and there is already a green wire plugged in pin 5. And the same color wire is plugged in pin 3 behind steering wheel.

[Freddy1]

Add 2TB to VO, recode.. thats it

Unfortunately no changes. Still doesn't work ):

---

Now my volume up/down and phone and mode button on steering wheel stopped working and the paddle shifters doesn't work.

Anyone have an idea what is wrong?

Yoiu sure you have plugged in everything correctly, I mean if it sits "tight"?

[simonchs]

Add 2TB to VO, recode.. thats it

Unfortunately no changes. Still doesn't work ):

---

Now my volume up/down and phone and mode button on steering wheel stopped working and the paddle shifters doesn't work.

Anyone have an idea what is wrong?

Have you checked the connecting line inside the steering wheel (or said under the airbag) is working?

[coskunhc]

How do I check that the connecting line is working? And everything is plugged in. I don't think that it can be plugged wrong? I mean there are 3 cables to plug behind steering wheel and they are all plugged in. But I my paddle shifters doesn't light either or is that normal? I mean isn't the paddle shifters going to light up in the dark?

[coskunhc]

I have now taken my airbag off and double checked connections. Everything seems to be sitting right. And the numbers of the steering wheel indicates that my steering wheel are this one https://dalys.lt/autodalys/bmw/x3-f25/vairas/2577801

Look at the attached image to see the wiring of the steering wheel paddles.

[coskunhc]

Hi all, I have solved the problem. The new steering wheel was from a x3 with different cable system, so I started to test out another cable system and it worked wit my coding. Thanks all for your time.