Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Bmw icom a1 original "cannot be used"
05-05-2014, 14:28 PM,
Post: #1
|
|||
|
|||
Bmw icom a1 original "cannot be used"
Hi guys I have two bmw icom a1 one original and one clone.
The clone icom a1 work prefect I update the firmware and all is ok. My problem is with icom a1 original I tried with 3 difference firmware to connect in my laptop but the icom a1 is red state " cannot be used " I tried to connect the ITool Radar and all is ok I tried connect via ip with web interface and all is ok but I can't to connect in my laptop . Please were is my problem ? Thanks |
|||
05-05-2014, 15:06 PM,
Post: #2
|
|||
|
|||
RE: Bmw icom a1 original "cannot be used"
(05-05-2014, 14:28 PM)spiridon Wrote: Hi guys I have two bmw icom a1 one original and one clone.you need register yours original ICOM to ISIS server then conect laptop to server. yours original ICOM hawe other MAC adress sory for me englisch |
|||
05-05-2014, 16:47 PM,
Post: #3
|
|||
|
|||
RE: Bmw icom a1 original "cannot be used"
This icom a1 worked in bmw dealer but now the bmw dealer is closed and I brought only bmw icom a1 with all cable and most.
Please how can connect this icom a1 in my laptop ? must to change mac address ? Thanks |
|||
05-05-2014, 17:49 PM,
Post: #4
|
|||
|
|||
RE: Bmw icom a1 original "cannot be used"
Create your registration files with your regional icom serial, edit device inventory file & unit registration file with your icom serials
Files paths are: 1- p:\apps\wsm\apps\manager\data\DeviceInventory-ICOM*******.xml 2- p:\apps\wsm\apps\manager\data\UnitRegistration-ICOM*******.xml 3- p:\apps\wsm\apps\agent\data\DeviceInventory-ICOM*******.xml 4- p:\apps\wsm\apps\agent\data\UnitRegistration-ICOM*******.xml * represent your icom serial number, (use cloned icom files to create you new ones) |
|||
06-05-2014, 12:10 PM,
Post: #5
|
|||
|
|||
RE: Bmw icom a1 original "cannot be used"
(05-05-2014, 17:49 PM)mksa Wrote: Create your registration files with your regional icom serial, edit device inventory file & unit registration file with your icom serials I think there is one file missing from list PXEBOOT WHERE YOU NEED TO CHNGE THE MAC |
|||
26-08-2014, 07:27 AM,
Post: #6
|
|||
|
|||
RE: Bmw icom a1 original "cannot be used"
First, you must find your dealer to help you solve the problem. It is the responsibility of the general dealers to provide technical help. If the dealer will not solve your problem. You can go here, online consulting experts to help you solve the problem about icom bmw a1.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content