Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
PROBLEM ABRITES CONNECTION TO FIAT ECU
16-05-2014, 19:24 PM,
Post: #1
|
|||
|
|||
PROBLEM ABRITES CONNECTION TO FIAT ECU
Hello, i have an abrites commander. When i try to connect with fiat ecu, the software tell me "target unit does no respond". Do you know why?
I need an adapter to connect with ecu? |
|||
16-05-2014, 20:57 PM,
Post: #2
|
|||
|
|||
RE: PROBLEM ABRITES CONNECTION TO FIAT ECU
AVDI do not use any adaptor for FIAT cars
Do you have a genuine AVDI? If yes did you activated by internet? Conatact your dealer if you have any issues Good luck |
|||
16-05-2014, 21:08 PM,
Post: #3
|
|||
|
|||
RE: PROBLEM ABRITES CONNECTION TO FIAT ECU
Yes i have a genuine AVDI. The interface cannot connect to ECU neither in diagnosis. I need to do any settings to perform a connection with Ecu or others module?
|
|||
16-05-2014, 22:11 PM,
Post: #4
|
|||
|
|||
RE: PROBLEM ABRITES CONNECTION TO FIAT ECU
Yes
Lantency must be set at 1 and change the com port from the one that it is installed automatically to other com port ( example: if the tool it is installed automatically when you install the drivers on com3 then change it on com5 and change the latency from 16 to 1 ) With interface plugged to the USB and internet connection turned on start the VW commander and in this time the software will be activated Then if your OS hasn;t any issues and it is upgraded you have to have no problem to connect to a car Good luck |
|||
21-05-2014, 07:06 AM,
Post: #5
|
|||
|
|||
PROBLEM ABRITES CONNECTION TO FIAT ECU
Maybe this is not supported ecu
iPhone Tapatalk |
|||
22-05-2014, 13:51 PM,
Post: #6
|
|||
|
|||
RE: PROBLEM ABRITES CONNECTION TO FIAT ECU
It's impossible, it's an EDC16 ECU, that is supported in the Fiat ECU Abrites package.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content