Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
6WA 35160wt - retrofit issue
11-11-2018, 10:57 AM,
(This post was last modified: 11-11-2018, 13:17 PM by pico.)
Post: #11
|
|||
|
|||
RE: 6WA 35160wt - retrofit issue
Yes, you need to put vin in 95320 to (<= don't ask me how, shop did that for me, twice...)
Had same problems with 6WA KOMBI2 cluster that showed tamper dot, even after let car go to sleep (+- 15 min), after leaving whole night next morning tamper dot was gone. You need to start all over again now cause tamper dot will stay no matter how many times you flash kombi. Edit: ista read outs from first non successful try |
|||
11-11-2018, 11:48 AM,
Post: #12
|
|||
|
|||
RE: 6WA 35160wt - retrofit issue
I see, your ista error is the same. Can you send me contact to shop via PM?
Or can anyone else point me to a programmer or someone who could read/write 95320, or how to via r270, thanks. |
|||
11-11-2018, 12:32 PM,
Post: #13
|
|||
|
|||
RE: 6WA 35160wt - retrofit issue
Don't think r270 can do the job, could be wrong though.
You need digiprog or similar eraser |
|||
20-11-2018, 13:02 PM,
Post: #14
|
|||
|
|||
RE: 6WA 35160wt - retrofit issue
I managed to get the 6WA running without red dot, working service intervals and no errors, thanks all for trying to help.
What did it was blanking with FF the one short vin I overlooked, I used the r270 as before (connected the 35160wt with a clip, didn’t de solder it). I also blanked with FF last 8 hex position in row 2E0 as suggested by someone on another forum, but I am sure that was not necessary to do. I didn’t touch the 95320 at all. I didn’t 0 the odometer, I didn’t touch the mileage at all. Then installed the KOMBI, added 6WA to the FA and coded car and then with ISTA/P cleared all fault codes. KOMBI works since then, no errors, no red dots, and all works fine. So my conclusion for F10 chassis is that as long as the KOMBI has lower mileage then the car you install it in you just have to blank all VINs in the main EEPROM and the car will accept the KOMBI. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
help 6WA retrofit please | johann74270 | 14 | 352 |
29-04-2024, 10:35 AM Last Post: johann74270 |
|
BMW f34 cluster 6wa virgin-retrofit | boweld11 | 1 | 70 |
26-04-2024, 13:53 PM Last Post: Ryzen |
|
Problem retrofit F20 6WA | johann74270 | 4 | 182 |
19-04-2024, 18:46 PM Last Post: johann74270 |
|
Mini F56 VIN reset - 35160WT | Platinum | 5 | 222 |
14-04-2024, 03:01 AM Last Post: DSESET86 |
|
bmw F21 retrofit 6wa | johann74270 | 1 | 86 |
08-04-2024, 15:37 PM Last Post: DSESET86 |
|
MMI 3G to MIB2 retrofit installation (TESTING In Progress) | m.murray | 0 | 145 |
14-02-2024, 22:20 PM Last Post: m.murray |
|
6WB Retrofit to G30 | smotorsport | 8 | 1,030 |
12-01-2024, 14:45 PM Last Post: Ratatouille98 |
|
Audi a3 2016 VC retrofit | papaosman | 1 | 234 |
21-12-2023, 22:24 PM Last Post: deutsch |
|
FRM issue | johann74270 | 4 | 308 |
12-11-2023, 15:12 PM Last Post: johann74270 |
|
bmw dash retrofit | autosolutions | 5 | 602 |
20-09-2023, 04:15 AM Last Post: Spitfire555 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content