Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Deleted
03-06-2014, 18:56 PM,
Post: #31
|
|||
|
|||
RE: ISTA/D 3.42.40_ISTA/P 2.52.3 VMware + Expert Mode
(03-06-2014, 18:38 PM)bjorneoen Wrote: ISTA/D works perfect with K+DCAN cable on my BMW E87 2006, but ISTA/P doesnt work.. Likely to be a cable problem (poor quality maybe). I have tested this with the icom emulator + kdcan on an E87 and it worked fine. Check pins 7 & 8 on your cable to see if they are connected or not. See pic below: http://img26.imageshack.us/img26/4107/interfacesp.jpg note: Yes means 7-8 bridged and No means 7-8 unbridged. |
|||
03-06-2014, 19:48 PM,
Post: #32
|
|||
|
|||
RE: ISTA/D 3.42.40_ISTA/P 2.52.3 VMware + Expert Mode
(03-06-2014, 18:56 PM)beemerboy88 Wrote:(03-06-2014, 18:38 PM)bjorneoen Wrote: ISTA/D works perfect with K+DCAN cable on my BMW E87 2006, but ISTA/P doesnt work..Likely to be a cable problem (poor quality maybe). I have tested this with the icom emulator + kdcan on an E87 and it worked fine. Oh, okey i see! I use this standard K+DCAN cable i bought from ebay: K+DCAN cable EBAY I know its cheap, but do you think it's poor quality? It looks just like all the other K+DCAN cables on ebay, even the one from one step electronics looks like this. What cable do you recommend? I've been using this cable for 1 year now, and it works perfectly with BMW Rheingold, ISTA/D, INPA, NCSEXPERT, so its so strange that it wont work with the ISTA/P? Did the E87 you tested have MOST connection? I tried an earlier ISTA/P version earlier this winter and then i couldnt connect either because the K+DCAN cable dont support MOST and therefore the session ended, do you think that could be the problem? I will check the pins! Thanks for answer |
|||
03-06-2014, 19:50 PM,
Post: #33
|
|||
|
|||
RE: ISTA/D 3.42.40_ISTA/P 2.52.3 VMware + Expert Mode
(03-06-2014, 16:34 PM)beemerboy88 Wrote:(03-06-2014, 15:53 PM)platy Wrote:(03-06-2014, 15:48 PM)beemerboy88 Wrote:(03-06-2014, 15:24 PM)platy Wrote: Hello, noe i have changed the serial and mac in the 4 Files, and update my icom to firmware rev 1.36.02 . but my ista /p status is stil RED . what i must change in the file p:\apps\wsm\apps\manager\data\PXEBootDevices.xml i dont understand this! |
|||
03-06-2014, 21:17 PM,
Post: #34
|
|||
|
|||
RE: ISTA/D 3.42.40_ISTA/P 2.52.3 VMware + Expert Mode
(03-06-2014, 19:50 PM)platy Wrote:(03-06-2014, 16:34 PM)beemerboy88 Wrote:(03-06-2014, 15:53 PM)platy Wrote:(03-06-2014, 15:48 PM)beemerboy88 Wrote:(03-06-2014, 15:24 PM)platy Wrote: Hello, Re-check your icom xmls for errors. There are several places in the XML files where the serial number needs to be typed in correctly. Sometimes it'll work without changing the PXEBootDevices.xml. But try it anyway. Just open the PXEBootDevices.xml in XML notepad (or similar tool), copy and paste one of the icom devices in the list and change the mac to match your icom. |
|||
03-06-2014, 21:21 PM,
Post: #35
|
|||
|
|||
RE: ISTA/D 3.42.40_ISTA/P 2.52.3 VMware + Expert Mode
I've tried again now, but still getting the same error..
I took some pictures showing what happens when i try to identify my car in ISTA/P. I dont know why its failing.. But i noticed that the connections in ISTA/D and ISTA/P looks different. In ISTA/D it looks something like this: (It says D-CAN, K-Line) But in ISTA/P it looks like this: (It says ICOM here, not D-can, k-line, why is it different?) Okey, so first i choose the connection in ISTA/P,then it starts checking my vin number: Then it asks if any control units were replaced: Then it starts checking vehicle access: Then i get a message saying "Missing interface at MOST direct access point, To program / encode control units, connect the interface to the MOST direct access point. Then continue": Then i just click OK to continue and then i get more information about my car, and it shows my VO list: Then i suddenly get an ERROR saying: "A logistics (KMM 1027) appeared when the measures plan was calculated. Contact technical support. You cannot continue the session for this vehicle". Then i just have to end the session As i said in the top, i dont know why it's failing but i believe it can have anything to do with i dont having any MOST in my car? Is that possible? Can ISTA/P be used to program earlier cars without MOST? I got a prefacelift BMW E87 2006 without MOST. I can't get past this error.. I dont know whats wrong ISTA/D works just fine! |
|||
03-06-2014, 21:38 PM,
Post: #36
|
|||
|
|||
RE: ISTA/D 3.42.40_ISTA/P 2.52.3 VMware + Expert Mode
(03-06-2014, 21:21 PM)bjorneoen Wrote: I've tried again now, but still getting the same error.. I think this is maybe an error with your car, not the cable or emulator (if it was a cable fault then normally it wouldn't find the VO list). Best to do a search for KMM error 1027 to see if others have had this problem. Here's one thread where it's mentioned: http://garage-automotive.com/showthread.php?pid=39528 |
|||
04-06-2014, 00:13 AM,
Post: #37
|
|||
|
|||
RE: ISTA/D 3.42.40_ISTA/P 2.52.3 VMware + Expert Mode
(03-06-2014, 21:21 PM)bjorneoen Wrote: I've tried again now, but still getting the same error.. Add "EMOA" to the VO and try again. |
|||
04-06-2014, 04:43 AM,
Post: #38
|
|||
|
|||
RE: ISTA/D 3.42.40_ISTA/P 2.52.3 VMware + Expert Mode
(04-06-2014, 00:13 AM)abac354 Wrote:(03-06-2014, 21:21 PM)bjorneoen Wrote: I've tried again now, but still getting the same error.. #EMOA turns off MOST. Personally, I didn't have to do this when I tried ista/p on an E87. The MOST message did appear. I accepted the message and everything still worked fine after that. |
|||
04-06-2014, 07:09 AM,
Post: #39
|
|||
|
|||
RE: ISTA/D 3.42.40_ISTA/P 2.52.3 VMware + Expert Mode
(03-06-2014, 16:34 PM)beemerboy88 Wrote:Ista /p Doesnt work. i have changed everything but it still RED.(03-06-2014, 15:53 PM)platy Wrote:(03-06-2014, 15:48 PM)beemerboy88 Wrote:(03-06-2014, 15:24 PM)platy Wrote: Hello, Firmware i have changed too. i have no idea more where is the problem. |
|||
04-06-2014, 15:13 PM,
Post: #40
|
|||
|
|||
RE: ISTA/D 3.42.40_ISTA/P 2.52.3 VMware + Expert Mode
Quote:Add "EMOA" to the VO and try again. Quote:Add "EMOA" to the VO and try again. Ahaa, i see! Thank you very much, im going to try that to see if that helps! I also may know why its failing.. I read the link you posted to me "bimmerboy" and he said something about: "Thank you Im currently looking into this istap error I believe it's because I did not code the radio to my car" And then i remembered that i have swapped out mine original Business CD player with an aftermarked Pioneer player. So i dont got the 1RAD module installed in my system. I also remembered that if i try to code the whole care using NCSEXPERT's "CODE CAR", all modules together, not one and one module, i get an error saying that 1RAD is missing and therefore it aborts the coding. So maybe that is the actual problem? That i dont have the original player in my car, so it can't find the radio module. Since i get that error in NCSEXPERT and it aborts the coding of the car, maybe its the same thing with ISTA/P, that i can't complete identification of the VIN number because my 1RAD module is missing. Do you think that can be the reason why i get the error? |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
HU Service Manager deleted Service History - F32 | Meriff99 | 7 | 552 |
01-03-2024, 18:51 PM Last Post: Meriff99 |
|
Solved ✔ Error can not be deleted | Siki78 | 6 | 566 |
18-03-2023, 16:53 PM Last Post: Siki78 |
|
EsysX, antivirus deleted files. Can someone help? | Kamcio | 3 | 700 |
04-03-2022, 22:36 PM Last Post: sambir |
|
DELETED | Mrg0721 | 36 | 7,528 |
19-02-2022, 19:27 PM Last Post: M-Simon |
|
BIN activation method deleted original FSC files | superczar | 2 | 749 |
12-03-2019, 10:51 AM Last Post: sqorpius |
|
All FSC after flash deleted | mateos | 3 | 808 |
16-02-2019, 15:27 PM Last Post: acolt |
|
Need Help CIC maps got deleted how do i reload | emailmax | 4 | 867 |
12-02-2019, 08:51 AM Last Post: emailmax |
|
Sorry, can be deleted (no further text) | M-Simon | 0 | 507 |
05-06-2017, 20:44 PM Last Post: M-Simon |
|
DELETED | Mrg0721 | 4 | 1,856 |
24-05-2017, 15:07 PM Last Post: Mrg0721 |
|
BMW Launcher V1.2 (Deleted) | scorpium59 | 16 | 10,910 |
09-12-2016, 12:46 PM Last Post: x16 |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content