Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

MINI EMS2K - MS5150 - EWS3
16-12-2018, 10:48 AM,
Post: #1
XSMini  MINI EMS2K - MS5150 - EWS3
Hello Guys,
i got a MINI Cooper S R53 preFL with a EMS2K DME and EWS3. I want to Switch to the Facelift DME MS5150 to flash the GP1 Software.
How can i transfer the ISN from the EMS2K to the MS5150? Which Tools/Software do i need?
And which Tools/Software i need to flash a Software on the Bench using Winkfp and Code it afterwards with NCS? Will CantieCar do this job?

Best Regards
Quote this message in a reply
31-12-2018, 11:23 AM,
Post: #2
RE: MINI EMS2K - MS5150 - EWS3
I don't think it is possible via OBD. I guess CanTieCar can't emulate KTAG or any other programmer that does BDM on EMS2K.

It might be easier to transfer the ISN from EWS using AK90 or XProg, very simple and cheap process. The VIN in the ECU will still be incorrect but that doesn't stop it from working.
Quote this message in a reply
31-12-2018, 13:02 PM,
Post: #3
RE: MINI EMS2K - MS5150 - EWS3
(16-12-2018, 10:48 AM)blax123 Wrote:  How can i transfer the ISN from the EMS2K to the MS5150? Which Tools/Software do i need?
You need to read the whole 29f400 flash memory. There are a lot of tools that support this ECU. AFAIK, even old Galletto reads the full flash. 

(16-12-2018, 10:48 AM)blax123 Wrote:  And which Tools/Software i need to flash a Software on the Bench using Winkfp and Code it afterwards with NCS? Will CantieCar do this job?

Well you already answered your own question. WinKFP and a OBD cable. EMS2K and MS5150 are directly connected to DIAGBUS. It's K-Line, not CAN-Bus so no need for a Gateway.

My two cents: Why MS5150? All the required changes for more power or even  GP1 maps can be flashed to EMS2K...
Quote this message in a reply
31-12-2018, 13:43 PM,
Post: #4
RE: MINI EMS2K - MS5150 - EWS3
(31-12-2018, 13:02 PM)o-dog Wrote:  
(16-12-2018, 10:48 AM)blax123 Wrote:  How can i transfer the ISN from the EMS2K to the MS5150? Which Tools/Software do i need?
You need to read the whole 29f400 flash memory. There are a lot of tools that support this ECU. AFAIK, even old Galletto reads the full flash.
You can read the entire flash, but can you also write the ISN with Galletto and/or other OBD tools? In my experience they read everything but only write the tune.
Quote this message in a reply
31-12-2018, 15:04 PM,
Post: #5
RE: MINI EMS2K - MS5150 - EWS3
I found out, that SMOK UHDS is able to read and write eprom and flash via OBD.
Found the Pins i need for 12v/Ground/K-Line.
So dont need to open and read via bootmode.
Someone knows at which adress the ISN is located?

I think Galetto reads Full File without ISN like MS42/43?

Yeah, just for switching to GP1 Soft.
How to flash the GP1 Soft on a EMS2K? This would be a life safer for me.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  mini r50 dashboard 3K91D pinout, dash bricked, i need flash and eeprom matiz 10 1,462 22-03-2024, 11:47 AM
Last Post: urgi
  SSD Request Mini R55 kimz 2 89 02-03-2024, 08:36 AM
Last Post: kimz
  Frm3 mini r60 3457587 dump ____ANGEL___ 3 437 23-02-2024, 12:08 PM
Last Post: Gatsby79
XZBMW NBT EVO from MINI, HW 5.1, Data 20/21 with GPS ppbarsrd 6 462 16-02-2024, 06:21 AM
Last Post: Siki78
  Retrofit HUD mini f60 Jalami 1 135 09-02-2024, 16:07 PM
Last Post: Powerlab
ZSkoda Mini R56 virginize Buntyk 2 244 06-02-2024, 11:08 AM
Last Post: petkowo
  R50/R52 Old mini INPA phara0n 1 116 30-01-2024, 17:47 PM
Last Post: pupu144
  Bmw/Mini cic/champ emulator e9x 66x Rxx megalo84 4 281 29-01-2024, 22:14 PM
Last Post: miskoh
  Mini F56 EVO ID4 to ID6 fullscreen Carplay Pedrom92 25 2,640 17-01-2024, 00:07 AM
Last Post: Pedrom92
XSMini Mini 35128WT erase VIN bm92 2 272 16-01-2024, 09:18 AM
Last Post: bm92

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content