[mcrussell]

Hi,

Does anyone have an FSC set for an ENTRYNAV that includes the Apps FSC? I have retrofitted one in my daughters car with an Emulator & it would be nice to add apps but the FSC set in the unit doesnt have it

[Wibbles]

Hi,

Does anyone have an FSC set for an ENTRYNAV that includes the Apps FSC? I have retrofitted one in my daughters car with an Emulator & it would be nice to add apps but the FSC set in the unit doesnt have it

You don't need an FSC to activate Apps

Attached the provisioning file, after unzip you should see an xml file which you can open, read but do not modify it.

xml is pretty straight forward and describes all services active for the car, this files also activates RTTI for cars with TCB from factory.

To load file need to open Tool32 and load ENTRYNAV.prg

Look for job “steuern_provisioning_data” and in the argument field you must type:

0x03;full path to xml and file name;0;

full path to xml and file name is for example c:\TCB_all_services_NBT.xml if you saved the xml file in C:\

Execute job and wait for OK message.

Services are activated after cars go to sleep mode.

For A4A (Apps) it must be coded as an option, so VO code 6NR and then just FDL code parameter A4A_SWT to nicht_aktiv.

[mcrussell]

Many thanks buddy, really appreciated, I managed to find a set with 9C in the end so I loaded those codes instead & added 6NR, however because the car is an early 2013 that originally had CHAMP2 without telematics, I cannot add it in the Connected Drive App & non of the Apps come up when connected via USB.

I am sure only the older BMW App (Brown icon) works with these ENTRYNAV units to give you Spotifiy etc.