[djordan]

Hi, I want to retrofit my ENTRYNAV HU (6.5" display) with NBT EVO id4, id5 or id6

Here is my VIN: wba8c91090k652100

My car don't have any Telematic ATM/TCB, Is that mean that I have GPS antenna port on my HU?

I read that NBT EVO id5/id6 units need ATM for GPS signal, is it case for id4 too?

What is best HU I can buy for retrofit for best hardware/software upgrade but with less possible emulators, antennas and other additional things?

I want as simple solution as: Buy unit, virginize it, install new FSC codes, code it and use it...

Is it possible?

[jaramillo]

You can get a evo with gps port... In your case most port is needed in HU, because of 6WA
If you cant find a unit with gps port you can use atm to provide gps signal, or you can disable maps if you dont want to use oem maps.
Carplay has nav apps...
Screen must be changed too

[djordan]

If I get unit with gps port I will not need any additional hardware?

All will be plug and play?

[RuleNormaliai]

If I get unit with gps port I will not need any additional hardware?

All will be plug and play?

yes, you will not need to retrofit ATM to get GPS signal, as EVO usualy does not have GPS connector like older systems, it gets GPS signal from ATM.

you will also need to change or modify your USB cable to work with EVO, might need to route two CAN2 cables from quadlock to controller, but it depends on which CAN is there now, as for EntryNAV it is more likely that CAN2 already.

another thing is OABR connector, if you will buy precoded EVO, then you don't need OABR, but if you will decide to do all the coding and patching by your self, you will need it, unless software version will be old(MAX 18.07), so you will be able to use USB patch.