Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
How to disable brake light faulty on BMW 520 LCi with NCS Expert?
04-06-2019, 20:12 PM,
Post: #1
|
|||
|
|||
How to disable brake light faulty on BMW 520 LCi with NCS Expert?
hi i have issuse on my bmw 520 lci 2010. i have brake light faulty on dashboard. Error code on ISTA d is 00A8C2 - front left direction faulty 2 , left brake faulty 2, rear left direction faulty 2. Im changed brake bulbs but still error. All lights working correctly ! How disable this faulty message with NCS Expert?
tx for answers |
|||
04-06-2019, 20:26 PM,
Post: #2
|
|||
|
|||
RE: How to disable brake light faulty on BMW 520 LCi with NCS Expert?
Chexk ground wire on taillight.
| BimmerFiks AS | Instagram | |
|||
05-06-2019, 06:10 AM,
Post: #3
|
|||
|
|||
RE: How to disable brake light faulty on BMW 520 LCi with NCS Expert?
or you can disable check for this bulbs, put your trc file. i can disable those check
BMW FSC RETROFIT PACK: CIC / NBT / NBTevo ID4/5/6 entryevo
Carplay NBTEVO, ENTRYEVO, MGU MAPS codes for maps: Premium - Motion - Move - Route - Next - Evo - Way Best prices PM |
|||
05-06-2019, 06:20 AM,
Post: #4
|
|||
|
|||
RE: How to disable brake light faulty on BMW 520 LCi with NCS Expert?
Why not try to fix it properly first? Third world country solutions for a premium car...
| BimmerFiks AS | Instagram | |
|||
05-06-2019, 11:37 AM,
(This post was last modified: 05-06-2019, 11:44 AM by deividasn.)
Post: #5
|
|||
|
|||
RE: How to disable brake light faulty on BMW 520 LCi with NCS Expert?
(05-06-2019, 06:10 AM)PsevDo Wrote: or you can disable check for this bulbs, put your trc file. i can disable those check trc from LMA or CAS? (05-06-2019, 06:20 AM)SweetBMW Wrote: Why not try to fix it properly first? Third world country solutions for a premium car... You are right first i check ground connection on the tailight. but if i dont found where is problem then i vill disable them. |
|||
05-06-2019, 11:58 AM,
Post: #6
|
|||
|
|||
RE: How to disable brake light faulty on BMW 520 LCi with NCS Expert?
TRC from LMA, disable kalt and warmcheck on the lines with BL in them, also fehlermeldung disable.
set to nicht_aktiv for disbale | BimmerFiks AS | Instagram | |
|||
05-06-2019, 19:31 PM,
Post: #7
|
|||
|
|||
RE: How to disable brake light faulty on BMW 520 LCi with NCS Expert?
You should also check main ground battery to Chassis. It has often bad contact and cause strange problems.
|
|||
06-06-2019, 06:52 AM,
Post: #8
|
|||
|
|||
RE: How to disable brake light faulty on BMW 520 LCi with NCS Expert?
Correct the problem instead of disabling them. The system is telling you something in the wiring is not right. Get wiring diagram and check all connections from FRM to light. You cant go disabling everything that is challenging to solve
|
|||
08-06-2019, 11:10 AM,
Post: #9
|
|||
|
|||
RE: How to disable brake light faulty on BMW 520 LCi with NCS Expert?
when you disable it be sure it's like ur removing fuses
short will not detected |
|||
12-06-2019, 10:03 AM,
Post: #10
|
|||
|
|||
RE: How to disable brake light faulty on BMW 520 LCi with NCS Expert?
And in worst case, there is added resistance in ground, meaning it can start burning something.
As others have said: repair the problem, don't put Your head under the pillow... |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content