Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
[Solved] NBT allways RESTARTING after mapupdate
|
09-03-2019, 20:55 PM,
(This post was last modified: 20-03-2019, 09:52 AM by acolt.)
Post: #1
|
|||
|
|||
[Solved] NBT allways RESTARTING after mapupdate
Hey guys!
I need some hints from you.... I have installed 2019-1 EU maps on an NBT (next). Right after update the unit startet to reboot all the time. Now I've let the car sleep over night and will continue tomorrow, meanwhile I wanted to ask here... -> I think it is the HDD or? -> only replacing of the unit/hdd would solve the problem or should I try to flash it? -> someone had a same issue? I would really appreciate for all help you'll give  Thx! ============== NEW INFO ============= I thaught it was the hdd, replacEd the unit, installed the fsc, unit working every thing is nice. Than i've started a map update from the same usb stick. AND NOW, I HAVE 2 Rebooting units!!!! So, the case is not in the unit, it is the data on flash drive or the usb stick itself. What I want to do: clear map data over tool32, but all the restart don't let me do that, anyone a hint how to make it stable for a short time and to launch map data clearing????  >> BMW FSC/SFA codes service <<  NCD 2.0 ~ SFA Tokens, FSC, 1AA Region Change ~ MGU1, MGU2, MGU2_2  KAFAS, NiVi, MGU, MRR ~ FSC retrofit codes |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
09-03-2019, 21:00 PM,
Post: #2
|
|||
|
|||
|
RE: NBT allways RESTARTING after mapupdate
have you tried to disconnect the battery?
for some Entrynav works. ![[Image: 29792092_1829236737095550_4115484565478044938_n_s.jpg]](https://admin.ecommerce.aruba.it/WebRoot/StoreIT5/Shops/57952/59D7/32D7/421A/F665/68CE/0A0A/B010/88B6/29792092_1829236737095550_4115484565478044938_n_s.jpg){kind=small} BMW TECHNICAL SERVICE INFORMATION - ITALY <> Full map update download all the world BMW FSC RETROFIT complete set: CIC / NBT / NBTevo id4/5/6 (Carplay included) - NBTevo VIM Map code Premium - Motion - Move - Route - Next - Evo ID4 |
|||
|
|
09-03-2019, 21:25 PM,
Post: #3
|
|||
|
|||
|
RE: NBT allways RESTARTING after mapupdate
Hmm, will try tomorrow...
>> BMW FSC/SFA codes service << NCD 2.0 ~ SFA Tokens, FSC, 1AA Region Change ~ MGU1, MGU2, MGU2_2 KAFAS, NiVi, MGU, MRR ~ FSC retrofit codes |
|||
|
|
|
10-03-2019, 03:38 AM,
Post: #4
|
|||
|
|||
|
RE: NBT allways RESTARTING after mapupdate
nbt hdds is not easy replacable, is there some parameter to remove maps in tool32? think I have this once on CIC.
|
|||
| Reputation: +1 - acolt [+1] | |||
|
|
|
10-03-2019, 06:33 AM,
Post: #5
|
|||
|
|||
|
RE: NBT allways RESTARTING after mapupdate
I had this issue once , apparently the NBT had old software so all I did is a software update.
|
|||
| Reputation: +1 - acolt [+1] | |||
|
|
|
10-03-2019, 07:00 AM,
Post: #6
|
|||
|
|||
|
RE: NBT allways RESTARTING after mapupdate
Okay, i'll try an update first, but if it is all the time rebooting would it get to calculate Tal?
>> BMW FSC/SFA codes service << NCD 2.0 ~ SFA Tokens, FSC, 1AA Region Change ~ MGU1, MGU2, MGU2_2 KAFAS, NiVi, MGU, MRR ~ FSC retrofit codes |
|||
|
|
|
10-03-2019, 07:04 AM,
Post: #7
|
|||
|
|||
RE: NBT allways RESTARTING after mapupdate
(10-03-2019, 07:00 AM)acolt Wrote: Okay, i'll try an update first, but if it is all the time rebooting would it get to calculate Tal? that actually a good question , with tool32 I remember there was an option in NBT.PRG to put NBT in flashing mode . you might need to look into that , all info in German which I am sure its not an issue for you 
|
|||
| Reputation: +1 - acolt [+1] | |||
|
|
|
10-03-2019, 12:04 PM,
Post: #8
|
|||
|
|||
|
RE: NBT allways RESTARTING after mapupdate
Thank you very much again
I'll let you know >> BMW FSC/SFA codes service << NCD 2.0 ~ SFA Tokens, FSC, 1AA Region Change ~ MGU1, MGU2, MGU2_2 KAFAS, NiVi, MGU, MRR ~ FSC retrofit codes |
|||
|
|
|
19-03-2019, 12:29 PM,
(This post was last modified: 19-03-2019, 12:41 PM by acolt.)
Post: #9
|
|||
|
|||
|
RE: [Need advice] NBT allways RESTARTING after mapupdate
============== NEW INFO =============
I thaught it was the hdd, replacEd the unit, installed the fsc, unit working every thing is nice. Than i've started a map update from the same usb stick. AND NOW, I HAVE 2 Rebooting units!!!! So, the case is not in the unit, it is the data on flash drive or the usb stick itself. What I want to do: clear map data over tool32, but all the restart don't let me do that, anyone a hint how to make it stable for a short time and to launch map data clearing???? >> BMW FSC/SFA codes service << NCD 2.0 ~ SFA Tokens, FSC, 1AA Region Change ~ MGU1, MGU2, MGU2_2 KAFAS, NiVi, MGU, MRR ~ FSC retrofit codes |
|||
|
|
|
19-03-2019, 13:57 PM,
Post: #10
|
|||
|
|||
RE: [Need advice] NBT allways RESTARTING after mapupdate
(19-03-2019, 12:29 PM)acolt Wrote: ============== NEW INFO ============= Did you do the map updates with same USB? maby some small data on the map USB is missing. If you have a ENET cable you can give me team acces, i can login in NBT an partitioning hdd from fresh. |
|||
| Reputation: +1 - emhtuning [+1] | |||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
