Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
How-to flash nbt evo id4 to id5/6
07-05-2019, 07:41 AM,
Post: #21
|
|||
|
|||
RE: How-to flash nbt evo id4 to id5/6
Hello,
I changed nbt with hw3.1. So I can flash it in id5 / 6 and have the carplay! Can someone describe me the steps to follow? thank's in advance |
|||
07-05-2019, 08:24 AM,
Post: #22
|
|||
|
|||
RE: How-to flash nbt evo id4 to id5/6
I highly recommend flashing on the bench. My evo flash in the car failed, mainly due to bad FA I think but it failed during bootloader flash so the unit needed to be restored with UART. Finally I flashed it on the bench to 07-18. Even on the bench it failed a couple of times but this was due to messed up unit. Now it works fine. I have hw 4.1. WIFI / BT works fine.
|
|||
07-05-2019, 08:31 AM,
Post: #23
|
|||
|
|||
RE: How-to flash nbt evo id4 to id5/6
OK,
is ther somebody with bench who can flash my nbt for a reasonable price? if possible in France or near |
|||
08-05-2019, 07:57 AM,
Post: #24
|
|||
|
|||
RE: How-to flash nbt evo id4 to id5/6
|
|||
08-05-2019, 10:42 AM,
Post: #25
|
|||
|
|||
RE: How-to flash nbt evo id4 to id5/6
it did not work but I found myself an HW3.1 just in case. So now I would like to flash the new device or to find someone to do it.
|
|||
08-05-2019, 11:18 AM,
Post: #26
|
|||
|
|||
RE: How-to flash nbt evo id4 to id5/6
I guess you dont have the touchscreen. Then dont go higher as 18-03 else you will get black screen. Or upgrade the screen to touchscreen apix2.
|
|||
14-05-2019, 15:00 PM,
Post: #27
|
|||
|
|||
RE: How-to flash nbt evo id4 to id5/6
|
|||
15-05-2019, 16:24 PM,
Post: #28
|
|||
|
|||
RE: How-to flash nbt evo id4 to id5/6
Hi, I'm looking for a tutorial too.. someone can describe how to do?
thanks |
|||
16-05-2019, 23:34 PM,
Post: #29
|
|||
|
|||
RE: How-to flash nbt evo id4 to id5/6
[HU_NBT2 - 63] installECUBL started [PROGRESS]
[HU_NBT2 - 63] installECUBL finished [PROGRESS] [HU_NBT2 - 63] finalizeECUBLUpdate started [PROGRESS] [HU_NBT2 - 63] finalizeECUBLUpdate finished [PROGRESS] [] There was an error, please check the log files. [WARN] [] - [Exception - HU_NBT2 - 63] job failed with negative response error: code: repeat job description: Service TD returned a negative response with response code generalProgrammingFailure; LinkName: HU_NBT2_63_ETHERNET_63 severity: ERROR and screen stock on flashing time 00:00 |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content