Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
VIN change with Tool32
13-06-2019, 17:09 PM,
Post: #1
|
|||
|
|||
VIN change with Tool32
I tried to change the VIN in the Combox module using Tool32, here are the steps i followed
Loaded Tool32 Selected cmediar Under jobs, selected c_fg_schreiben Pasted the VIN on the section below Arguments Clicked on 1 time process button (or whatsoever its called, (1~>)) repeated the process for c_fg_auftrag While the process states job successful, but when I read the VIN using INPA its shows "yyyyyyyy" Am i doing something wrong? (I am trying to change the vin back to my original vin) |
|||
13-06-2019, 17:35 PM,
Post: #2
|
|||
|
|||
RE: VIN change with Tool32
Do you input only VIN or VIN with the 17th digit checksum number?
I always use the VIN with 17th digit checksum number (from NCSExpert for example) and it usually works. Never done Combox tho. |
|||
13-06-2019, 21:16 PM,
Post: #3
|
|||
|
|||
RE: VIN change with Tool32
Inpa is reading from the UIF field.
If you run job C_FG_LESEN it will likely show your correct vin, if you want to get rid of the YYYYYY you need to also write the uif using job AIF_SCHREIBEN. |
|||
13-06-2019, 21:17 PM,
Post: #4
|
|||
|
|||
RE: VIN change with Tool32
flash it with winfpf
|
|||
14-06-2019, 06:05 AM,
(This post was last modified: 14-06-2019, 06:27 AM by youbarajs.)
Post: #5
|
|||
|
|||
RE: VIN change with Tool32
(13-06-2019, 17:35 PM)JCTI Wrote: Do you input only VIN or VIN with the 17th digit checksum number? Vin + Checksum from the ncsexpert FA screen (total of 18 digits,17 digits VIN and 1 checksum) (13-06-2019, 21:16 PM)dstrickland Wrote: Inpa is reading from the UIF field. I will try this and report back.. |
|||
14-06-2019, 10:04 AM,
Post: #6
|
|||
|
|||
RE: VIN change with Tool32
I tired to write vin with AIF_SCHREIBEN job, but it gives me following error, am I missing something
"Error_vehicle_identification_NR" I followed the similar process of selecting CMEDIAR and changing the VIN using AIF_SCHREIBEN job. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
DIY: Reset FXX FEM Mileage, change VIN, and add keys with affordable tools | armenh7 | 2 | 614 |
17-05-2024, 20:39 PM Last Post: armenh7 |
|
NBT EVO HDD change tutorial | RuleNormaliai | 20 | 2,817 |
13-05-2024, 23:34 PM Last Post: bo0tn1c |
|
EVO HW.5.1 brick after region change/ V850 | Satia | 12 | 925 |
10-05-2024, 21:36 PM Last Post: DarkSide |
|
CIC Exx and Fxx change language in CZ? | chang2 | 26 | 6,433 |
08-05-2024, 05:57 AM Last Post: zero9 |
|
buy solution for change ISN for MG1 and MD1 | dfb | 0 | 238 |
15-04-2024, 00:21 AM Last Post: dfb |
|
Tool32 Brakefluid Argument | bmchicago | 4 | 376 |
29-03-2024, 13:41 PM Last Post: bmchicago |
|
BMW e39 530d 2001 problem after MAF change | boweld11 | 3 | 189 |
24-03-2024, 22:44 PM Last Post: SkeYT |
|
[Question] Change X1 F48 gearbox | jaramillo | 9 | 1,500 |
24-03-2024, 21:27 PM Last Post: masa52 |
|
How to change VIN code in VCM via Esys? | vipsha | 5 | 1,539 |
14-03-2024, 22:20 PM Last Post: tcp443 |
|
FLM change | TomSab | 0 | 112 |
12-03-2024, 19:17 PM Last Post: TomSab |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content