Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Which controller for NBT Evo Retrofit in F10?
02-07-2019, 12:33 PM,
(This post was last modified: 02-07-2019, 16:40 PM by thstorm.)
Post: #1
|
|||
|
|||
Which controller for NBT Evo Retrofit in F10?
HI@all
i currently have an NBT EVO ID6 on my bench, hooked up to an ZGW02 and kept alive with an Raspberry pi can PICAN sending the following two CAN-Messages every 0.1 sec. static tCAN message1; message1.id = 0x130; //formatted in HEX message1.header.rtr = 0; message1.header.length = 5; //formatted in DEC message1.data[0] = 0x45; message1.data[1] = 0x40; message1.data[2] = 0x22; //formatted in HEX message1.data[3] = 0x8F; message1.data[4] = 0xFE; static tCAN message2; message2.id = 0x12F; //formatted in HEX message2.header.rtr = 0; message2.header.length = 8; //formatted in DEC message2.data[0] = 0x37; message2.data[1] = 0x7C; message2.data[2] = 0x8A; message2.data[3] = 0xDD; //formatted in HEX message2.data[4] = 0xD4; message2.data[5] = 0x05; message2.data[6] = 0x33; message2.data[7] = 0x06; Now i have the problem that my controller (ZBE4) does not work. I can see the controller in Esys as long as i press any button on the controller. When i stop pressing any button it disappears in esys Seems to me that the controller does neet some extra can messages to keep alive? Can anyone point me in the right direction? |
|||
02-07-2019, 13:24 PM,
Post: #2
|
|||
|
|||
RE: Keep ZBE4 alive on bench with can-messages?
Whats the point it won't work in your F11 anyway.
Unless you use an emulator to translate CAN4 messages |
|||
02-07-2019, 13:29 PM,
(This post was last modified: 02-07-2019, 13:30 PM by thstorm.)
Post: #3
|
|||
|
|||
RE: Keep ZBE4 alive on bench with can-messages?
I had the plan to hook up the NBT (and TBX/ZBE) to the KCAN2.
I read that this would work. |
|||
02-07-2019, 13:31 PM,
Post: #4
|
|||
|
|||
RE: Keep ZBE4 alive on bench with can-messages?
|
|||
02-07-2019, 13:38 PM,
(This post was last modified: 02-07-2019, 13:48 PM by thstorm.)
Post: #5
|
|||
|
|||
RE: Keep ZBE4 alive on bench with can-messages?
which do i need?
ZBE3? i currently have ZBE4 (65826844224), is it codable/flashable to zbe3? Will this one work? 65826804688 |
|||
02-07-2019, 16:39 PM,
Post: #6
|
|||
|
|||
RE: Keep ZBE4 alive on bench with can-messages?
I changed the topic title because the main question ist now which controller does work with my nbt retrofit.....
|
|||
02-07-2019, 16:58 PM,
Post: #7
|
|||
|
|||
RE: Keep ZBE4 alive on bench with can-messages?
|
|||
22-07-2019, 05:49 AM,
Post: #8
|
|||
|
|||
RE: Which controller for NBT Evo Retrofit in F10?
I can make your zbe4 working with id6
|
|||
22-07-2019, 08:04 AM,
Post: #9
|
|||
|
|||
RE: Which controller for NBT Evo Retrofit in F10?
Please tell us:
How do you make this? Changing the Hardware? Flashing the ZBE3 software to ZBE4? |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,377 |
Yesterday, 08:06 AM Last Post: smilo |
|
Kafas issue aftrer ACC Retrofit | It3_Magic | 14 | 594 |
23-04-2024, 07:44 AM Last Post: It3_Magic |
|
G82 rear tail lights CSL retrofit | Sauron | 10 | 784 |
20-04-2024, 07:35 AM Last Post: SANYA |
|
BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS | intel123 | 891 | 466,278 |
20-04-2024, 01:05 AM Last Post: fe7565 |
|
Neck warmer retrofit | Just2fast5 | 5 | 379 |
17-04-2024, 11:20 AM Last Post: Spirit5676 |
|
ID4 evo to ID6 Evo full retrofit, ATM issues 03178A | mitch32 | 1 | 181 |
15-04-2024, 17:52 PM Last Post: mitch32 |
|
BMW E84 Cruise control retrofit not workig | Alyn546 | 4 | 219 |
12-04-2024, 14:23 PM Last Post: DieStream |
|
F10 FLA retrofit | beng2k | 30 | 1,041 |
11-04-2024, 18:43 PM Last Post: beng2k |
|
BMW f20 KOMBI2 retrofit | bm92 | 15 | 512 |
10-04-2024, 07:51 AM Last Post: bm92 |
|
Car Systems / Custom Retrofit Garage ENBT Adapter | Ulsmak | 39 | 2,077 |
02-04-2024, 08:25 AM Last Post: painsage |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content