[DayvG]

I’ve just completed an Evo retrofit on my F10 and almost everything is working as it should. The only issue I currently have is I can’t measure the oil level. I have an LCI 530D and this was functioning before the retrofit. I can find 2 FDL codes for oil (OELS) one enables the menu and it looks like the other should detail the vehicle. With the menu FDL as the only active option I get engine oil level to high contact service partner. With having both active I get something along the lines of measurement currently inactive, if problem recurs contact service partner. 

Whilst playing with the codes earlier I got it to give me the option to start the measurement but wouldn’t allow it to happen as it wanted a 30 min drive to warm the oil. Now I can’t recreate that option. Any advice please? This is the only thing left to get working. Thanks