[ImmBoo]

Hello all,
got a bit weird problem with F series coding.

I'm using ICOM Next China clone with ESYS 3.27.1 runing with Luncher 2.7.1 on virtual machine (Parallels Desktop on MacBook Pro).
Network port configured for DHCP.
Network adapter set for Bridget Connection with Thunderbolt Ethernet in Parallels Desktop.

Everything is working great except F10/F11 coding with Esys software.
ISTA- D is connecting great with car, all is working as it should in ISTA- D.
But when trying to connect via ESYS to make some coding, I got error that there is no connection with the car (error C060). (Log File Attached with config photos)
Trying to connect via ICOM/Ethernet with tcp://169.254.92.38:50160

In any other F series cars everything is working as it should. Esys is connecting great with any F30/ F20/ F25 etc, everything is working as it should.

I have tried to connect with few F10 cars- allways the same. No connection.

*** When trying to connect with ENET cable, there is no problem. ***
---- Connection via VIN is working great with enet cable. ----

ICOM locked with iToolRadar (with unlocked same story)
Firewall is OFF.
Tried on different system with ESYS 3.30 on VMWare Fusion- same story.
WiFi is turned OFF (same with WiFi ON)
Tried with engine running, with ignition only as well- nothing changes.


Did anyone seen something like this?
Any solution?


Thanks in advance.

[willisodhiambo]

China clone ethernet problem. Get your hands on a genuine icom, test and report.

Have had same issue with china clone A2

[ImmBoo]

It's really weird for me, because how is it possible?

I do understand that the china icom clone could have some problems, but why only with F10? 
Does the F10 have any other way to comunicate with esys than F30 for example? 
And if does, why then is the diagnostic working without any problems? 

Thank in advance.

[ImmBoo]

UPDATE
Yesterday tried with OEM ICOM NEXT and everything is working now.
The problem seems to be only with the China clone.

Thanks for help.

[DNK76]

I have Chinese A1 clone and works with ESYS,
same as ICOM NEXT original,
on each F-series
Your icom clone has a problem with the ethernet connection
with ISTA works through DCAN, a common problem with A2 clone

[ImmBoo]

I have Chinese A1 clone and works with ESYS,
same as ICOM NEXT original,
on each F-series
Your icom clone has a problem with the ethernet connection
with ISTA works through DCAN, a common problem with A2 clone

Yes, the problem is only with PRC Clone. 
On OEM ICOM NEXT everything is working as it should. 
Soo got two devices now, but mostly using OEM.