Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Cannot connect to car with Esys - Enet and Icom Next
25-09-2019, 20:45 PM,
Post: #1
|
|||
|
|||
Cannot connect to car with Esys - Enet and Icom Next
I have a problem with connecting to my own car, its a 2013 F13,
I have been successfully working with both Esys 27, 28 and 3.33.4 without any problems. Ista+ will connect without any problems and gives full functionality but it will only connect through ICOM Next. Esys will not connect through either ENET or the ICOM Next through any of the Esys connection options. It also will not connect through the Connection via VIN option (this says no ZGW available). ZGW was flashed recently however I had no problems connecting and coding afterwards. I am using a power supply to the car and KL15 and KL30 are at 14.5V and have tried different ENET cables with the same results (no connection), I have also tried 2 different versions of Psdzdata with both Esys 27 and 334. The config has not been changed from when it was working and no Windows updates have been installed between it working and not working. I assume that because ISTA can connect with ICOM Next that the fault is not with the ZGW. ZGW Search does not return an IP address with ENET. Any ideas would be gratefully received |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content