Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

NBT flash fail in car and on bench also
02-10-2019, 22:10 PM,
Post: #11
RE: NBT flash fail in car and on bench also
(02-10-2019, 19:54 PM)emhtuning Wrote:  If there is no  router ( hardware or software ) then no matter what version is used wont solve any problem , that's what I meant to say . I know 3.27.1 is still a heavy duty version but without router it wont flash with HTTP protocol ..

I flash NBT all day long with 3.27.1 over http, no problem
And no router needed. On bench that is.
Quote this message in a reply
02-10-2019, 22:30 PM,
Post: #12
RE: NBT flash fail in car and on bench also
I have the same problem with the new esys 3.33.4....I solve this with esys 3.28.x smile
Quote this message in a reply
03-10-2019, 07:26 AM,
Post: #13
RE: NBT flash fail in car and on bench also
esys and psdzdata problem, not http.

handshakehandshake
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA FSCmap 184 53,381 24-04-2024, 14:49 PM
Last Post: Bag3ban1
  MGU Bench connection kimz 4 460 22-04-2024, 17:06 PM
Last Post: kimz
  Flash CAS 3 for disable ELV UnFan 3 206 19-04-2024, 08:20 AM
Last Post: ravager
XZBMW Flash MPPK software 20D B47 (Esys) ruben_17non 5 580 10-04-2024, 21:38 PM
Last Post: ruben_17non
  Test bench Connection to CAN ECU's HaakonA 3 312 03-04-2024, 07:24 AM
Last Post: sixcode
XZBMW BMW G8x M3/M4 CSL EGS flash weby 22 3,654 31-03-2024, 19:48 PM
Last Post: Erezbmwm
XZBMW m2 g87 csl flash Erezbmwm 0 134 31-03-2024, 18:46 PM
Last Post: Erezbmwm
  CCC flash WINKFP ICOM BimmerSLO 9 368 29-03-2024, 19:17 PM
Last Post: Hoborg
XZBMW Tool for bench read 8hp Garryq 9 1,674 26-03-2024, 09:32 AM
Last Post: skywoker
  Bosch MEVD172H bench backup mrproper 1 280 23-03-2024, 18:43 PM
Last Post: Ratnik1990

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content