[Fatalix]

Ive tried flashing nbt Yesterday with esys 3.33 but got hu_63_ethernet failure and blue screen. Using icom Next and dhcp router. Retrofitted NBT with no emulator

How do i proceed?

[emhtuning]

many threads have already discussed this issue , i advise you to do some search , some advised to use esys 3.27.1 , which I found it solving many flashing issue specially with NBT .

also it will nice to mention which car are you working with .

[lustek]

Correct. Need to calculate svt and tal in 3.33 and then use them while flashing in 3.27.1

[Fatalix]

Succesfully flashed with ista+
Car is f36 2014 - gd69959

Now trying to import repair fsc codes from bmw sgate, i get following when trying to import fsc codes using esys. Car is originaly born with nbt but replaced with used nbt just now.

It does accept the certifcate when checking fsc status though.

[lustek]

It will be very nice if you write how you resolved your problem whike flashing. What configuration you use?

[emhtuning]

flashing is not enough , you need to virgin the headunit first . then it will accept the new fsc kit

[bmwcoder75]

Correct. Need to calculate svt and tal in 3.33 and then use them while flashing in 3.27.1

What are you talking about?
Useless information 
Use 3.27.1 for example and that's it. No need to use higher version to calculate and then lower one for flash.
3.27.1 will do everything just fine

---

It will be very nice if you write how you resolved your problem whike flashing. What configuration you use?

He used ISTA he said

[lustek]

Correct. Need to calculate svt and tal in 3.33 and then use them while flashing in 3.27.1

What are you talking about?
Useless information 
Use 3.27.1 for example and that's it. No need to use higher version to calculate and then lower one for flash.
3.27.1 will do everything just fine

---

It will be very nice if you write how you resolved your problem whike flashing. What configuration you use?

He used ISTA he said

Hi, read one more time his messages.

1. Old esys dont work with newest psdzata. Thats why need use old and new one.

2. He wrote in first messages that use icom and ista and get blue screen. So if he finally flash with ista must change config

[larshutten]

Succesfully flashed with ista+
Car is f36 2014 - gd69959

Now trying to import repair fsc codes from bmw sgate, i get following when trying to import fsc codes using esys. Car is originaly born with nbt but replaced with used nbt just now.

It does accept the certifcate when checking fsc status though.

Clear existing fsc codes with tool32 and you are good to go. Current fsc codes inside HU are newer than from your repair package.

[bmwcoder75]

Correct. Need to calculate svt and tal in 3.33 and then use them while flashing in 3.27.1

What are you talking about?
Useless information 
Use 3.27.1 for example and that's it. No need to use higher version to calculate and then lower one for flash.
3.27.1 will do everything just fine

---

It will be very nice if you write how you resolved your problem whike flashing. What configuration you use?

He used ISTA he said

Hi, read one more time his messages.

1. Old esys dont work with newest psdzata. Thats why need use old and new one.

2. He wrote in first messages that use icom and ista and get blue screen. So if he finally flash with ista must change config

And why would you need to flash a NBT with newest data? Where did you see that BMW keeps many new data for old ecu that are no longer used in production?
Many F series ECU don't even have a new update since 2014.
You have to understand what you are doing and what is involved in doing so.