Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Good or Bad Vas5054A
11-03-2017, 16:33 PM,
Post: #1
|
|||
|
|||
Good or Bad Vas5054A
Hello. I bought a VAS5054A Clone. I hope it is no crap. >>>THIS ONE <<<
My problem is. I get no ignition in ODIS 2.2.4 and 3.0.3. Thank you |
|||
12-03-2017, 02:10 AM,
Post: #2
|
|||
|
|||
RE: Good or Bad Vas5054A
I have one of those, and it works just fine.
|
|||
12-03-2017, 10:34 AM,
Post: #3
|
|||
|
|||
RE: Good or Bad Vas5054A
|
|||
12-03-2017, 15:45 PM,
Post: #4
|
|||
|
|||
RE: Good or Bad Vas5054A
Windows 7 64-bit. Used with ODIS-S 2.2.7, 3.0.3, over Bluetooth and USB. ODIS-E 5.0.14 and ODIS-E 6.7.5 over USB just fine.
|
|||
12-03-2017, 16:09 PM,
Post: #5
|
|||
|
|||
RE: Good or Bad Vas5054A
|
|||
14-03-2017, 22:09 PM,
Post: #6
|
|||
|
|||
RE: Good or Bad Vas5054A
Post some real pictures of your vas with interior also (between boards) and then will tell you what u got . Chinese vas is a big and i mean BIG lottery.
90% of cases it is not what was pictured. & are welcome if you think that i helped you
|
|||
15-03-2017, 13:22 PM,
Post: #7
|
|||
|
|||
RE: Good or Bad Vas5054A
|
|||
15-03-2017, 16:02 PM,
Post: #8
|
|||
|
|||
RE: Good or Bad Vas5054A
Since you did not unsolder the bt pcb board to make pictures of interior boards (witch are very important), on a first look i can tell you this:
1. Memory : even if industrial model and speed ok 10ns are crap because are not 5V model and in fact are 3V model and wrong ones. 2. Forget the OKi chip, can even unsolder because it is fake 3. I suspect also that the chip near oki is also a chinese fake(picture not so clear) 4. Some wrong parts there, but that is not end of world. If you put interior ones then i can tell you what else is there fc..ed. & are welcome if you think that i helped you
|
|||
15-03-2017, 16:34 PM,
Post: #9
|
|||
|
|||
RE: Good or Bad Vas5054A
Ok. OKI Chip is for Ford Modells? Right?
Now i have modified the pdu api and the bas5054a is working like a charm! Test it with odis 3.0.3 and api vers. 1.20.037. Every thing Works fine |
|||
17-03-2017, 19:10 PM,
Post: #10
|
|||
|
|||
RE: Good or Bad Vas5054A
I'm looking to buy a 5054a, it's a mine field......could anyone recommend which to buy and where from?
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content