Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ E SYS cic programing help
18-10-2019, 15:44 PM,
(This post was last modified: 22-10-2019, 12:48 PM by Clusters.)
Post: #1
|
|||
|
|||
E SYS cic programing help
hello i want to reflash cic but i dont see in list in esys i get tal but not work
|
|||
18-10-2019, 15:47 PM,
(This post was last modified: 18-10-2019, 15:48 PM by jaramillo.)
Post: #2
|
|||
|
|||
RE: E SYS cic programing help
If you want to reflash you should modify/manipulate the initial SVT
Just in that way you can proceed. |
|||
18-10-2019, 20:55 PM,
Post: #3
|
|||
|
|||
RE: E SYS cic programing help
This must be calculate with a TALFILTER
|
|||
22-10-2019, 10:03 AM,
Post: #4
|
|||
|
|||
RE: E SYS cic programing help
there's a guide to ecu flashing in this forum, and you can always follow that guide. but to put it simply:
in comfort mode, read FA and then save it. read SVT and then save it as SVT_IST entering the istep shipment and target, calculate, then save it as SVT_SOLL then calculate TAL based on those mentioned two SVT. and choose execute. then you'll continue to TAL-Processing. just like your attachment |
|||
22-10-2019, 10:09 AM,
Post: #5
|
|||
|
|||
RE: E SYS cic programing help
(22-10-2019, 10:03 AM)88tuning.id Wrote: there's a guide to ecu flashing in this forum, and you can always follow that guide. but to put it simply: He didn't ask for a guide to flash his CIC in general. He already successfully calculated TAL. I think his CIC just does not get any newer SWFL so it is not included in the TAL. As already said: manipulate TAL and just include the SWFLs which are already on the CIC... |
|||
22-10-2019, 12:17 PM,
Post: #6
|
|||
|
|||
RE: E SYS cic programing help
I fix problem i get older e sys and i flash it with 3.27 esys
Thanx you all |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content