[kimetp]

hello i want to reflash cic but i dont see in list in esys i get tal but not work

[jaramillo]

If you want to reflash you should modify/manipulate the initial SVT
Just in that way you can proceed.

[Jumper]

This must be calculate with a TALFILTER

[88tuning.id]

there's a guide to ecu flashing in this forum, and you can always follow that guide. but to put it simply:

in comfort mode, read FA and then save it.
read SVT and then save it as SVT_IST
entering the istep shipment and target, calculate, then save it as SVT_SOLL
then calculate TAL based on those mentioned two SVT. and choose execute.

then you'll continue to TAL-Processing. just like your attachment

[xxiFear]

there's a guide to ecu flashing in this forum, and you can always follow that guide. but to put it simply:

in comfort mode, read FA and then save it.
read SVT and then save it as SVT_IST
entering the istep shipment and target, calculate, then save it as SVT_SOLL
then calculate TAL based on those mentioned two SVT. and choose execute.

then you'll continue to TAL-Processing. just like your attachment

He didn't ask for a guide to flash his CIC in general.
He already successfully calculated TAL.
I think his CIC just does not get any newer SWFL so it is not included in the TAL.
As already said: manipulate TAL and just include the SWFLs which are already on the CIC...

[kimetp]

I fix problem i get older e sys and i flash it with 3.27 esys

Thanx you all