Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ DACIA DCM 3.4 Clone problem
20-01-2022, 16:19 PM,
(This post was last modified: 26-01-2022, 23:25 PM by Clusters.)
Post: #1
|
|||
|
|||
DACIA DCM 3.4 Clone problem
Hello mates, 2 weeks ago i had to clone dcm 3.4 for Dacia Duster. I succesfully read and write flash with KTAG and also read and write eeprom with VVDI Prog by pinout. I put cloned ecu on car, it started ok but i cannot accelerate, acceleration pedal is not recognized.
This week just for testing changed same type of ecu ( DCM 3.4 ) on a Dacia Logan same engine (1.5 DCI ), this time i just read eeprom from original and write to donor ECU, no flash . Also car start but no acceleration. Any advice? Thank you in advance Attached below duster backups for any check |