Possibly Related Threads…

***Airbus*** · 02-11-2023, 09:19 AM,

Can some1 provide me with adding DAB/DMB to US-HU?
remotely would be perfect

***Ladedruck*** · 05-02-2024, 19:31 PM,

Can someone correct me please crc on my adjblock .

Attached original and modified .

Thanks

***Limespirit*** · 20-02-2024, 10:27 AM,

(05-02-2024, 19:31 PM)Ladedruck Wrote: Can someone correct me please crc on my adjblock .

Attached original and modified .

Thanks

Here you go the new file CRC has been corrected.

***Rajco*** · 27-02-2024, 23:39 PM,

Hello, would someone be so kind as to adjust my adjustblocks? it's about an ID4.
When I remove the FM Tuner module I see the menu, of course it restarts.
With FM Tuner module I see the BMW Start Animation for a short time and then only BlackScreen. I think that there is a false tuner module built in here, possibly from America or with DAB.
The ID4 only has FM without DAB and without satellite radio.
I would be very grateful if someone could adapt this for me.
GPS internal it also has, this one has not been retrofitted. GPS has it out of the box

I read the file twice, I hope it fits it's 2kb

Please i hope some one Help me.

thx

***zero9*** · 28-02-2024, 00:06 AM,

iboc,dab,sdars,vics are not enabled for that dump. gps is.

***Rajco*** · (This post was last modified: 28-02-2024, 00:19 AM by Rajco.)

Thank you, but with the tuner module I don't see a menu, just the boot logo. When I remove the tuner module I see the menu, but it starts again after a short time. iboc is the user manual? what is VICS?

is there a black screen patch? with a built-in tuner module the ID4 does not restart. It stays stable, I just have a black screen. it was flashed to ID6. Region change didn't help either

***Limespirit*** · 28-02-2024, 09:44 AM,

If you have flashed id4 to id6 software you will need VO fix, either get a feature code or contact me to do it remotely.

***Rajco*** · 28-02-2024, 11:40 AM,

I have a VO FIX code, a code with patch for CarPlay, a code for SSH, and a region change code.
The Navigation system starts with the tuner card, I see the BMW logo briefly and then only a black screen.
When I remove the tuner card and start without the tuner I finally see the idrive menu but then I have the problem that it keeps restarting.

So i think its the problem with Adjust Blocks or Tuner Card

***Limespirit*** · 28-02-2024, 16:25 PM,

It is normal for the EVO to restart without the tuner card installed, every a couple of seconds/minutes. There might be something clashing in your adjust... Check your PM

***Rajco*** · 28-02-2024, 22:47 PM,

thanks bro, it was solved, FeatureInstaller couldn't solve the black screen, HUTool could solve it.

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	need ista 3.55.11 standalone, for changing AGR rate	sathunter	7	411	06-03-2024, 23:58 PM Last Post: wrp_199
	NBT EVO ID5/6 Changing Adjust Block	ferrytan25	6	1,165	20-02-2024, 18:30 PM Last Post: Limespirit
	NBT EVO changing stations randomly	jaramillo	0	229	13-07-2023, 03:08 AM Last Post: jaramillo
	Problem in BMW F36 changing typschlussel in FA	number7	5	400	07-07-2023, 06:52 AM Last Post: Siki78
	changing cas3+ frequency from 315 to 434	mercuris	24	2,150	04-03-2023, 12:38 PM Last Post: ____ANGEL___
	E65 Changing voice commands language from german to english	rana	11	1,261	30-09-2022, 05:41 AM Last Post: joz
	2004 E60 changing steering to Servotronic from Hydraulic	GoNz0-	5	707	05-09-2022, 12:21 PM Last Post: GoNz0-
	trying to flash F10 ZGW-01 after changing it but getting strange error	iyade46	3	514	20-07-2022, 18:02 PM Last Post: Node
	mgu changing car colour	Trys2penki	5	809	03-02-2022, 13:27 PM Last Post: Trys2penki
	Changing vin mevd1724 dme, what is the easiest way without flashing.?	willisodhiambo	2	511	11-08-2019, 19:32 PM Last Post: willisodhiambo

Contact Us