Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to
[email protected]
|
17-07-2023, 13:53 PM,
|
![]()
|
laquangksxd
Donator
|
Posts: 196
Threads: 45
Threads: 45
Thanks Received: 272 in 74 posts
Thanks Given: 31
Joined: Jan 2022
Reputation:
154
|
|
RE: Changing adjustblock
(17-07-2023, 11:29 AM)NWBMW Wrote: Can someone check / change my Adjblock to GPS activated? GPS Port seems to be retrofitted but i can't flash.
upload your .bin file. If gps is enabled in adjbock. You will get error with swfl_0000271a when flashing
- Secure coding (NCD 2.0) fit to FA changed (Typschlussel, Serie, Region...).
- FSC 1AA002 OEM for remove component protection MGU18/21 (only case BDC replace).
- ID8.5 (SFA) conversion/ change region map.
- Virgin Kafas4, MRR, RAM used.
- Mgu patch, fsc custom match to vin, remove CP.
- Reset ISN 7DTC, 8HP for F, G serie (include EGS7).
- Write ISN MG1/MD1 with remotely.
- Carplay/Android Auto MGU with/without ATM (6AE).
Skype live:laquangksxd
|
|
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
•
|
|
17-07-2023, 15:29 PM,
|
|
Mwahab
Donator
|
Posts: 737
Threads: 72
Threads: 72
Thanks Received: 313 in 190 posts
Thanks Given: 334
Joined: Dec 2016
Reputation:
137
|
|
RE: Changing adjustblock
(17-07-2023, 13:53 PM)NWBMW Wrote: (17-07-2023, 13:16 PM)RuleNormaliai Wrote: (17-07-2023, 11:29 AM)NWBMW Wrote: Can someone check / change my Adjblock to GPS activated? GPS Port seems to be retrofitted but i can't flash.
if GPS port installed correctly, it does not affect flashing in any way. also no adjblock editing is needed.
Ok, then any other issue is caused by the evo.....Flash via UDS will stop at 99 % on swfl 271a / http not possible.
271A is a problem in HDD, DVD or the board in between them
All my knowledge is free for exchange with valuable information
Sharing->Development
- FSC Repair kits - FSC Retrofits and Conversions Service history
- Secure Coding 2.0 Type Key, FA, SFA, LCS Switch, SecOc, SME/HV Replacement
- NBT/EVO/EntryNav2/MGU
- MGU Carplay/Android auto W/O Telematics/CP/Patching in Middle East and Northern Africa
- Feature Installer codes B2B
- DME VIN ISN Working Hours IMMO OFF File and Remote Service/SWIFTEC - MG1 MD1 IMMO OFF
- (E,F,G) 7DCT - DKG - 8HP - 6HP - EGS7 ISN Reset
- KAFAS4 Virgin and Patching Remote
- CAS2/3/4 Full IMMO & LOCKSMITH Customization Dump & Remote
- HUF5663_434Mhz NO REMOTE SIGNAL FIX
- F&G Series Headlight Customization
|
|
|
•
|
|
17-07-2023, 17:58 PM,
|
|
RuleNormaliai
Donator
|
Posts: 282
Threads: 24
Threads: 24
Thanks Received: 229 in 99 posts
Thanks Given: 35
Joined: Jan 2022
Reputation:
93
|
|
RE: Changing adjustblock
(17-07-2023, 13:53 PM)NWBMW Wrote: (17-07-2023, 13:16 PM)RuleNormaliai Wrote: (17-07-2023, 11:29 AM)NWBMW Wrote: Can someone check / change my Adjblock to GPS activated? GPS Port seems to be retrofitted but i can't flash.
if GPS port installed correctly, it does not affect flashing in any way. also no adjblock editing is needed.
Ok, then any other issue is caused by the evo.....Flash via UDS will stop at 99 % on swfl 271a / http not possible.
most often radio antenna (DAB/SDARS/AM/FM) is being changed and gives this error, what is your HWEL ? and what connectors do you have on right side of your Head Unit when looking from the back? (yellow, green, pink, black, white)
MGU Patching/Virginizing.
Feature Installer codes.
Physical NBT EVO Repairs.
CarPlay activations.
Remote BMW Coding.
 [email protected]
|
|
|
•
|
|
14-08-2023, 18:30 PM,
|
|
808AWD325xi
Member
|
Posts: 54
Threads: 4
Threads: 4
Thanks Received: 23 in 13 posts
Thanks Given: 60
Joined: Jan 2014
Reputation:
10
|
|
RE: Changing adjustblock
(19-01-2023, 17:43 PM)walkernight88 Wrote: (19-01-2023, 00:34 AM)RomeyRome Wrote: Swapped eeprom for a brand new one.
Unit booted into bootloader
Switched it into app mode.
EEPROM was still blank.
CAFD was gone in esys.
Coded cafd, stuff got written to eeprom.
Did some GPS FDL coding, some stuff changed in eeprom.
Still don't seem to be getting a gps signal. I'm just testing through tool32.
Like I said, I don't know the point of changing eeprom is, but I'm doing it. lol
sysetV850io only dumps 5k. It's a 64k chip, so I don't know what the rest of it is.
95640 -> 64kilobits -> 8KB.
Here's a complete dump from mine without GPS from 95640. Or what have you dumped?
"Matthew53
That's interesting. In my case sysetV850io dump only 2k. Maybe it depend where syset is copied on the HU?"
Adjustblock is 2036bytes. So it's correct. He's talking about an eeprom...
Sorry to get off-topic. I examined the 95640_EEPROM.bin and there appears to be a 1024-bit RSA modulus beginning at 0x1269 and ending at offset 0x12e8:
0xe6cf0d7bf47a2fb62065023bb3f9cebea490c0f2d5a3ebf6e76b1eaad1134e3e827a440b3a04d38224670730c04ab4f0d27cab4dfb6a30e87d1e19536968019491db138424e282e76ce539c49f82ae48b11be00472a116ecec20158c49189e1fe0c49ed2f11a979b1e180174bd510d66aa79697d3a46ef87c562f79a31675edb
It is coprime with a RSA public exponent of 03. It could be coincidental, but I doubt it.
|
|
|
•
|
|
14-08-2023, 20:17 PM,
|
|
|
Vadim AA
Member
|
Posts: 153
Threads: 0
Threads: 0
Thanks Received: 55 in 47 posts
Thanks Given: 6
Joined: Jul 2015
Reputation:
7
|
|
RE: Changing adjustblock
(14-08-2023, 18:30 PM)808AWD325xi Wrote: (19-01-2023, 17:43 PM)walkernight88 Wrote: (19-01-2023, 00:34 AM)RomeyRome Wrote: Swapped eeprom for a brand new one.
Unit booted into bootloader
Switched it into app mode.
EEPROM was still blank.
CAFD was gone in esys.
Coded cafd, stuff got written to eeprom.
Did some GPS FDL coding, some stuff changed in eeprom.
Still don't seem to be getting a gps signal. I'm just testing through tool32.
Like I said, I don't know the point of changing eeprom is, but I'm doing it. lol
sysetV850io only dumps 5k. It's a 64k chip, so I don't know what the rest of it is.
95640 -> 64kilobits -> 8KB.
Here's a complete dump from mine without GPS from 95640. Or what have you dumped?
"Matthew53
That's interesting. In my case sysetV850io dump only 2k. Maybe it depend where syset is copied on the HU?"
Adjustblock is 2036bytes. So it's correct. He's talking about an eeprom...
Sorry to get off-topic. I examined the 95640_EEPROM.bin and there appears to be a 1024-bit RSA modulus beginning at 0x1269 and ending at offset 0x12e8:
0xe6cf0d7bf47a2fb62065023bb3f9cebea490c0f2d5a3ebf6e76b1eaad1134e3e827a440b3a04d38224670730c04ab4f0d27cab4dfb6a30e87d1e19536968019491db138424e282e76ce539c49f82ae48b11be00472a116ecec20158c49189e1fe0c49ed2f11a979b1e180174bd510d66aa79697d3a46ef87c562f79a31675edb
It is coprime with a RSA public exponent of 03. It could be coincidental, but I doubt it.
Congratulation! You found signature for coding data with hash (28DA1F1280E75D7D2818E1572DFAABD5). 
|
|
|
•
|
|
15-08-2023, 02:29 AM,
|
|
|
808AWD325xi
Member
|
Posts: 54
Threads: 4
Threads: 4
Thanks Received: 23 in 13 posts
Thanks Given: 60
Joined: Jan 2014
Reputation:
10
|
|
RE: Changing adjustblock
(14-08-2023, 20:17 PM)Vadim AA Wrote: (14-08-2023, 18:30 PM)808AWD325xi Wrote: (19-01-2023, 17:43 PM)walkernight88 Wrote: (19-01-2023, 00:34 AM)RomeyRome Wrote: Swapped eeprom for a brand new one.
Unit booted into bootloader
Switched it into app mode.
EEPROM was still blank.
CAFD was gone in esys.
Coded cafd, stuff got written to eeprom.
Did some GPS FDL coding, some stuff changed in eeprom.
Still don't seem to be getting a gps signal. I'm just testing through tool32.
Like I said, I don't know the point of changing eeprom is, but I'm doing it. lol
sysetV850io only dumps 5k. It's a 64k chip, so I don't know what the rest of it is.
95640 -> 64kilobits -> 8KB.
Here's a complete dump from mine without GPS from 95640. Or what have you dumped?
"Matthew53
That's interesting. In my case sysetV850io dump only 2k. Maybe it depend where syset is copied on the HU?"
Adjustblock is 2036bytes. So it's correct. He's talking about an eeprom...
Sorry to get off-topic. I examined the 95640_EEPROM.bin and there appears to be a 1024-bit RSA modulus beginning at 0x1269 and ending at offset 0x12e8:
0xe6cf0d7bf47a2fb62065023bb3f9cebea490c0f2d5a3ebf6e76b1eaad1134e3e827a440b3a04d38224670730c04ab4f0d27cab4dfb6a30e87d1e19536968019491db138424e282e76ce539c49f82ae48b11be00472a116ecec20158c49189e1fe0c49ed2f11a979b1e180174bd510d66aa79697d3a46ef87c562f79a31675edb
It is coprime with a RSA public exponent of 03. It could be coincidental, but I doubt it.
Congratulation! You found signature for coding data with hash (28DA1F1280E75D7D2818E1572DFAABD5).
Thank you for letting me know that I spotted something Is that ECDSA?
|
|
|
•
|
|
15-08-2023, 03:31 AM,
|
|
|
Vadim AA
Member
|
Posts: 153
Threads: 0
Threads: 0
Thanks Received: 55 in 47 posts
Thanks Given: 6
Joined: Jul 2015
Reputation:
7
|
|
RE: Changing adjustblock
No, it is 1024-bit RSA
|
|
|
The following 1 user says Thank You to Vadim AA for this post:1 user says Thank You to Vadim AA for this post
• 808AWD325xi
|
|
26-08-2023, 16:10 PM,
|
|
rickynguyen
Member
|
Posts: 334
Threads: 69
Threads: 69
Thanks Received: 28 in 22 posts
Thanks Given: 276
Joined: Nov 2018
Reputation:
7
|
|
RE: Changing adjustblock
Anyone sell old HUtool 3.9 ?
|
|
|
•
|
| Possibly Related Threads… |
| Thread |
Author |
Replies |
Views |
Last Post |
|
need ista 3.55.11 standalone, for changing AGR rate |
sathunter |
7 |
428 |
06-03-2024, 23:58 PM
Last Post: wrp_199
|
|
|
NBT EVO ID5/6 Changing Adjust Block |
ferrytan25 |
6 |
1,208 |
20-02-2024, 18:30 PM
Last Post: Limespirit
|
| |
NBT EVO changing stations randomly |
jaramillo |
0 |
237 |
13-07-2023, 03:08 AM
Last Post: jaramillo
|
|
|
Problem in BMW F36 changing typschlussel in FA |
number7 |
5 |
410 |
07-07-2023, 06:52 AM
Last Post: Siki78
|
|
|
changing cas3+ frequency from 315 to 434 |
mercuris |
24 |
2,181 |
04-03-2023, 12:38 PM
Last Post: ____ANGEL___
|
|
|
E65 Changing voice commands language from german to english |
rana |
11 |
1,279 |
30-09-2022, 05:41 AM
Last Post: joz
|
| |
2004 E60 changing steering to Servotronic from Hydraulic |
GoNz0- |
5 |
725 |
05-09-2022, 12:21 PM
Last Post: GoNz0-
|
|
|
trying to flash F10 ZGW-01 after changing it but getting strange error |
iyade46 |
3 |
522 |
20-07-2022, 18:02 PM
Last Post: Node
|
| |
mgu changing car colour |
Trys2penki |
5 |
819 |
03-02-2022, 13:27 PM
Last Post: Trys2penki
|
| |
Changing vin mevd1724 dme, what is the easiest way without flashing.? |
willisodhiambo |
2 |
520 |
11-08-2019, 19:32 PM
Last Post: willisodhiambo
|
Users browsing this thread:
1 Guest(s)
Return to TopReturn to Content
