Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Rheingold get error while programming -> "faulty icom -car connection -> programming
|
23-02-2022, 15:49 PM,
Post: #1
|
|||
|
|||
|
Rheingold get error while programming -> "faulty icom -car connection -> programming
Dear all,
I have the following problem while trying to program F20 or F30: Diagnosis work but programming not -> get "faulty icom -car connection -> programming not possible" error In Rheingold connection manager DCAN and ENET is stated as diagnosis mode. In WEB Admin (60080) i see following under HSFZ (vehicle ethernet available / no HSFZ Ecu found) I use a clone ICOM A2 with ICOM-Image-03-15-04 and IP 192.168.4.1 (before i tried with older FW and was same). Rheingold version is 4.28.x (i also tried older version but had same error). What can be the issue? br |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
23-02-2022, 15:52 PM,
(This post was last modified: 23-02-2022, 15:52 PM by Node.)
Post: #2
|
|||
|
|||
|
RE: Rheingold get error while programming -> "faulty icom -car connection -> programming
99.9% faulty ethernet in your clone. Did it work before?
|
|||
|
|
|
23-02-2022, 16:30 PM,
(This post was last modified: 23-02-2022, 16:31 PM by Sedoy.)
Post: #3
|
|||
|
|||
|
RE: Rheingold get error while programming -> "faulty icom -car connection -> programming
Sorry, already answered.
|
|||
|
|
|
24-02-2022, 08:24 AM,
Post: #4
|
|||
|
|||
|
RE: Rheingold get error while programming -> "faulty icom -car connection -> programming
yes it worked in the past
|
|||
|
|
|
24-02-2022, 08:44 AM,
(This post was last modified: 24-02-2022, 08:44 AM by Node.)
Post: #5
|
|||
|
|||
|
RE: Rheingold get error while programming -> "faulty icom -car connection -> programming
Try with another car then. Or do battery reset on that car.
|
|||
|
|
|
10-11-2022, 12:47 PM,
Post: #6
|
|||
|
|||
RE: Rheingold get error while programming -> "faulty icom -car connection -> programming
13:00:22same problem here any suggestions? as above fresh insulation of win10x64 Installation method of ISTA 4.32.15 with full SDP(for programming) diagnose and codding working but under Software Update shows "faulty icom vehicle connection" enet cable working perfectly |
|||
|
|
|
10-11-2022, 23:54 PM,
Post: #7
|
|||
|
|||
|
RE: Rheingold get error while programming -> "faulty icom -car connection -> programming
What is your ICOM? I see that China but can I have a photo
|
|||
|
|
|
11-11-2022, 18:23 PM,
Post: #8
|
|||
|
|||
|
RE: Rheingold get error while programming -> "faulty icom -car connection -> programming
Try programming just with Enet version instead of the ICom
If I help you, please push thanks and reputation.
 |
|||
|
|
|
11-11-2022, 18:51 PM,
Post: #9
|
|||
|
|||
|
RE: Rheingold get error while programming -> "faulty icom -car connection -> programming
for me it was a faulty icom -> CAN and KLINE were ok but ENET was not working
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
