Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
DCAN or ENET for Motorrad?
22-10-2023, 18:25 PM,
Post: #11
|
|||
|
|||
RE: DCAN or ENET for Motorrad?
TCP port nothing to do with D-CAN
But D-CAN for diagnosis don't use PT-CAN which is for PowerTrain communication. Vojnó
Press Thanks and reputation if this post helped you. |
|||
23-10-2023, 16:41 PM,
Post: #12
|
|||
|
|||
RE: DCAN or ENET for Motorrad?
|
|||
23-10-2023, 16:44 PM,
Post: #13
|
|||
|
|||
RE: DCAN or ENET for Motorrad?
Quote:I used k+dcan utility 2.0 to set “500kbit/s DCAN AND PT-can” it says “done” and led on interface shuts off like it’s supposed to. Normally it is enough to install DCAN/KLINE cable with FTDI driver, set the COM port e.g. COM9 (then change it in edibias obd.ini COM9 aswell) and connect to the motorcycle with Ista+ and edibias. VIN and voltage is not displayed to me via DCAN/KLINE but ECUs are detected and errors can be cleared. |
|||
23-10-2023, 19:54 PM,
Post: #14
|
|||
|
|||
RE: DCAN or ENET for Motorrad?
(23-10-2023, 16:44 PM)b3dn Wrote:Quote:I used k+dcan utility 2.0 to set “500kbit/s DCAN AND PT-can” it says “done” and led on interface shuts off like it’s supposed to. Thanks, I'll reinstall ISTA and try again this weekend |
|||
24-10-2023, 06:43 AM,
Post: #15
|
|||
|
|||
RE: DCAN or ENET for Motorrad?
(23-10-2023, 16:41 PM)zemanely Wrote:(22-10-2023, 18:25 PM)Vojno Wrote: TCP port nothing to do with D-CAN As far as I know, nothing else is needed! If it works with cars, you only need to switch ISTA to motorcycles. Vojnó
Press Thanks and reputation if this post helped you. |
|||
29-10-2023, 14:51 PM,
Post: #16
|
|||
|
|||
RE: DCAN or ENET for Motorrad?
So, thank you both @Vojno and @b3dn. I finally managed to get ISTA+ to recognise my R1200RS.
Turns out that Windows messed up the FTDI driver. That was my issue all along. I installed the k+dcan driver that the seller provided me and EasyConnect started showing voltage as green. Also, I had to select “500kbit/s D-CAN” for my adapter, otherwise ISTA woudn't communicate with the bike. |
|||
15-03-2024, 08:50 AM,
(This post was last modified: 15-03-2024, 08:54 AM by piteerus.)
Post: #17
|
|||
|
|||
RE: DCAN or ENET for Motorrad?
I got 2018 S1000XR with standard/normal (rectangle) OBD plug without TFT screen and can confirm for connection ENET cable cannot be used! K-DCan cable is essential for diagnostics usign ISTA+. However what shall be used for codding then? ISTA-P? ICom? I'm lost. I need to change miles to kilometers.
I was trying with NCSExpert, but I'm missing SP-Daten for S100XR K49 (K001 chassis). The newes ones v71 (I think so) does not have them. Please help. |
|||
15-03-2024, 11:29 AM,
Post: #18
|
|||
|
|||
RE: DCAN or ENET for Motorrad?
You require ICOM and ESYS.
|
|||
09-05-2024, 10:29 AM,
Post: #19
|
|||
|
|||
RE: DCAN or ENET for Motorrad?
Have both, but still no luck of connecting. ISTA+ works in terms of clearing faults and reading data, but no programming or coding. Esys cant connect....
com.bmw.esys.commons.exception.PsdzException: Execution of command "requestFaFromMaster" failed. [C005] at com.bmw.esys.domain.psdz.PsdzVcm.generateException(PsdzVcm.java:829) at com.bmw.esys.domain.psdz.PsdzVcm.getStandardFaFromPsdzResult(PsdzVcm.java:102) at com.bmw.esys.domain.control.ConnectionLogic.requestVehicleConnectionParameters(ConnectionLogic.java:470) at com.bmw.esys.gui.control.ConnectionDialog$ActionConnect.showDialogToReadParamsFromVcm(ConnectionDialog.java:1533) at com.bmw.esys.gui.control.ConnectionDialog$ActionConnect.connect(ConnectionDialog.java:1393) at com.bmw.esys.gui.control.ConnectionDialog$ActionConnect.doActionPerformed(ConnectionDialog.java:1328) at com.bmw.esys.gui.AbstractView$AbstractGuiAction.actionPerformed(AbstractView.java:285) at java.desktop/javax.swing.AbstractButton.fireActionPerformed(Unknown Source) |
|||
09-05-2024, 11:17 AM,
Post: #20
|
|||
|
|||
RE: DCAN or ENET for Motorrad?
If you want to use E-sys with ICOM, then or first read it with ISTA and then start E-sys, or the CAN Bridge must be set!
Vojnó
Press Thanks and reputation if this post helped you. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Help for INPA motorrad | Desmo.Gabe | 2 | 21 |
3 minutes ago Last Post: Desmo.Gabe |
|
ISTA+ motorrad | Danmac | 14 | 2,488 |
09-05-2024, 07:42 AM Last Post: Vojno |
|
Bimmercode for BMW Motorrad | Edward1968 | 2 | 177 |
11-04-2024, 12:33 PM Last Post: Edward1968 |
|
BMW Motorrad Service history by VIN ? | Nerox | 4 | 205 |
12-01-2024, 21:25 PM Last Post: bennymx |
|
Motorrad TFT coding options list | Jbpetkov | 13 | 3,181 |
12-11-2023, 12:56 PM Last Post: NIGHT2000 |
|
Motorrad coding software with ICOM | bmwgstech | 8 | 1,279 |
03-09-2023, 18:17 PM Last Post: laalves911 |
|
ISTA reads only with ENET cable | Edward1968 | 9 | 1,182 |
02-07-2022, 15:20 PM Last Post: dlgudqja1282 |
|
BMW Motorrad (RSD) Repair and Service Data 09.2017 | ferrum | 0 | 2,021 |
15-05-2019, 13:42 PM Last Post: ferrum |
|
BMW Motorrad (RSD) Repair and Service Data 09.2016 | aammjj | 11 | 8,997 |
11-04-2018, 05:06 AM Last Post: Ken Oath |
|
BMW Motorrad (RSD) Service Data 12.2011 | Faisc@ | 4 | 5,211 |
30-05-2017, 12:45 PM Last Post: ipcsr76 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content