[Ckh091020]

I tried to change Class_PWR in CAS, it is giving me error when I select Class_1 or Class_2, I tried invalid no good , only option work is Keline. The error pop-up ( in the attachment?

[PDXAutoworks]

I tried to change Class_PWR in CAS, it is giving me error when I select Class_1 or Class_2, I tried invalid no good , only option work is Keline. The error pop-up ( in the attachment?

Power class has to be changed in the CAS eeprom. Read dump and post it.

[Ckh091020]

This seem to be a hex editor job, if so, May I ask what is the address and what value needs to be change for the power class ? or I have to rest engine hour?

[bmchicago]

this sounds like the DME is not coded correctly. There should not need to change power class if it already matches the CAS.

Post flash files of your MSD81 and we'll reset the working hours for you if dont know how. After resetting working hours, recode DME

If you are using NCS, you will have to change the TYPE code to match the DME variant in the VO for the DME to show up to recode.

Change NB93 to NW13 or NW23

CODIERUNG_PROTOKOLL_MSD80
WERT_01 to WERT_02

[Ckh091020]

may need to dump this down for me , 95640 should be a 64kb files size when you read the chip? when I use CGDI Chip reader ( 95xxx) it only read 32kb  , u think the R270 or CH341 read it.

[PDXAutoworks]

Hours cleared

DME READ_hours_cleared.zip
File Type:
Downloaded:	8 times
Size:	3.52 KB

[Ckh091020]

Thanx PDXAutoWorks. I am having issue with the read Eeprom, doesn't seem a complete read even it is complete out of the board, I just bought another read to see. we will be in touch, thanx