Possibly Related Threads…

***jacek.marciuk*** · 27-05-2022, 07:17 AM,

Hello,

I want to unlock automatic lane change in g20 20' ece.
but can't find "c_swa_vorhanden" or any similar in SAS3.

any ideas ?

***luntik*** · 27-05-2022, 13:51 PM,

So use another launcher that has better or newer mapping

***masa52*** · 27-05-2022, 14:46 PM,

send me your cafd I will activate for you
Im not sure but also dsc vip need this

***luntik*** · 27-05-2022, 17:23 PM,

(27-05-2022, 14:46 PM)masa52 Wrote: send me your cafd I will activate for you
Im not sure but also dsc vip need this

VIP isn't required to be coded if you have SAS

***st1*** · 27-05-2022, 18:08 PM,

The 3 codes to be changed are:
HU_NBT or HU_MGU:
Spurwechselassistent - Change this to Aktiv

SAS Module:
C_SWA_Vorhanden - Change this to True
C_SWA_Land_Aktiv - You will have to edit the Werte values to "FF, FF, FF, FF" This is the item that blocks it from working in certain regions.

***iliannavy*** · 05-10-2022, 07:23 AM,

(27-05-2022, 18:08 PM)st1 Wrote: The 3 codes to be changed are:
HU_NBT or HU_MGU:
Spurwechselassistent - Change this to Aktiv

SAS Module:
C_SWA_Vorhanden - Change this to True
C_SWA_Land_Aktiv - You will have to edit the Werte values to "FF, FF, FF, FF" This is the item that blocks it from working in certain regions.

Hello.
I tryed all of these settings but without success.I have 5AT.After these settings I can see on the display but is not working.
Mine is SAS2 [22] CAFD_00001C7A_003_004_005

***jb2005*** · 05-10-2022, 08:55 AM,

(05-10-2022, 07:23 AM)iliannavy Wrote:
(27-05-2022, 18:08 PM)st1 Wrote: The 3 codes to be changed are:
HU_NBT or HU_MGU:
Spurwechselassistent - Change this to Aktiv

SAS Module:
C_SWA_Vorhanden - Change this to True
C_SWA_Land_Aktiv - You will have to edit the Werte values to "FF, FF, FF, FF" This is the item that blocks it from working in certain regions.

Hello.
I tryed all of these settings but without success.I have 5AT.After these settings I can see on the display but is not working.
Mine is SAS2 [22] CAFD_00001C7A_003_004_005

You cannot enable automatic lane change on 5AT.

***Node*** · 05-10-2022, 09:02 AM,

(05-10-2022, 08:55 AM)jb2005 Wrote:
(05-10-2022, 07:23 AM)iliannavy Wrote:
(27-05-2022, 18:08 PM)st1 Wrote: The 3 codes to be changed are:
HU_NBT or HU_MGU:
Spurwechselassistent - Change this to Aktiv

SAS Module:
C_SWA_Vorhanden - Change this to True
C_SWA_Land_Aktiv - You will have to edit the Werte values to "FF, FF, FF, FF" This is the item that blocks it from working in certain regions.

Hello.
I tryed all of these settings but without success.I have 5AT.After these settings I can see on the display but is not working.
Mine is SAS2 [22] CAFD_00001C7A_003_004_005

You cannot enable automatic lane change on 5AT.

That is PURE BS. My G30 has 5AT and automatic lane change is enabled FROM FACTORY. Even described in the manual!!!

Whether that is useful, is totally different story biggrin

Maybe if you drive on long stretches of road with only occasional other cars.

***jb2005*** · 05-10-2022, 09:11 AM,

(05-10-2022, 09:02 AM)Node Wrote:
(05-10-2022, 08:55 AM)jb2005 Wrote:
(05-10-2022, 07:23 AM)iliannavy Wrote:
(27-05-2022, 18:08 PM)st1 Wrote: The 3 codes to be changed are:
HU_NBT or HU_MGU:
Spurwechselassistent - Change this to Aktiv

SAS Module:
C_SWA_Vorhanden - Change this to True
C_SWA_Land_Aktiv - You will have to edit the Werte values to "FF, FF, FF, FF" This is the item that blocks it from working in certain regions.

Hello.
I tryed all of these settings but without success.I have 5AT.After these settings I can see on the display but is not working.
Mine is SAS2 [22] CAFD_00001C7A_003_004_005

You cannot enable automatic lane change on 5AT.

That is PURE BS. My G30 has 5AT and automatic lane change is enabled FROM FACTORY. Even described in the manual!!!

Whether that is useful, is totally different story Maybe if you drive on long stretches of road with only occasional other cars.

Very interesting. Did your G30 catch the SP2018 package with MGU?

***iliannavy*** · 05-10-2022, 09:17 AM,

(05-10-2022, 09:02 AM)Node Wrote:
(05-10-2022, 08:55 AM)jb2005 Wrote:
(05-10-2022, 07:23 AM)iliannavy Wrote:
(27-05-2022, 18:08 PM)st1 Wrote: The 3 codes to be changed are:
HU_NBT or HU_MGU:
Spurwechselassistent - Change this to Aktiv

SAS Module:
C_SWA_Vorhanden - Change this to True
C_SWA_Land_Aktiv - You will have to edit the Werte values to "FF, FF, FF, FF" This is the item that blocks it from working in certain regions.

Hello.
I tryed all of these settings but without success.I have 5AT.After these settings I can see on the display but is not working.
Mine is SAS2 [22] CAFD_00001C7A_003_004_005

You cannot enable automatic lane change on 5AT.

That is PURE BS. My G30 has 5AT and automatic lane change is enabled FROM FACTORY. Even described in the manual!!!

Whether that is useful, is totally different story Maybe if you drive on long stretches of road with only occasional other cars.

Which cafd files I have to check? Or If you want i can send you my cafd files of needed modules or you can send yours to compare.

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	CIC Exx and Fxx change language in CZ?	chang2	22	6,215	1 hour ago Last Post: JaVlk
	[MEGA] ESYS + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS	hashtagmaster	109	36,831	1 hour ago Last Post: hashtagmaster
	EVO HW.5.1 brick after region change/ V850	Satia	9	433	6 hours ago Last Post: Airbus
	xdrive off with esys without error in dash	dankocg	15	3,105	04-05-2024, 11:55 AM Last Post: kami2k
	GenEsys Creator (New Tool FA ESYS)	scorpium59	417	30,880	02-05-2024, 11:52 AM Last Post: bassam82
	BimmerUtility vs Esys Launchers	diagso	568	110,751	02-05-2024, 09:41 AM Last Post: graphys
	ESys Launcher PRO Setup 2.8.1	fengyonghua21	412	49,875	28-04-2024, 09:14 AM Last Post: Pommie
	NBT EVO HDD change tutorial	RuleNormaliai	19	2,570	26-04-2024, 17:23 PM Last Post: grizzle
	Bmw G31 retrofit Mgu id7 atm problem	intranet	20	2,491	26-04-2024, 08:06 AM Last Post: smilo
	Esys error message only on EPS. ''Failed to get CAFs for SWE''	arthur101	2	136	25-04-2024, 22:48 PM Last Post: arthur101

Contact Us