[German80]

Hello,

I retrofitted surround-view 5DN on my BMW G30. !!!! All working no problem.

But, I cannot proper flash to my car VO.

Camera files SWFL unkn_FFFFFFFF_255_255_255




_______________________________________________


Read SVT before TAL execution started.


TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
ExecutionID=2022/06/22-19:37:00.766
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForFlash started [PROGRESS]
[] prepareVehicleForFlash finished [PROGRESS]
[ICAM3 - 6] prepareECUforBLUpdate started [PROGRESS]
[ICAM3 - 6] prepareECUforBLUpdate finished [PROGRESS]
[ICAM3 - 6] authenticateECUforBLUpdate started [PROGRESS]
[ICAM3 - 6] authenticateECUforBLUpdate finished [PROGRESS]
[ICAM3 - 6 - btld_00002c15-004_008_006] Transaction type: blFlash;  Message: TA started [TRANSACTION]
[ICAM3 - 6] performECUBLUpdate started with protocol UDS [PROGRESS]
MCDDiagService<id=56649, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUFlashBL, service=RC_EM_IE - RoutineControl EraseMemory IndicatedErasing, description=error: negative response : requestOutOfRange, link=ICAM3_06_ETHERNET_06> [DIAGSERVICE]
[ICAM3 - 6 - btld_00002c15-004_008_006] Transaction type: blFlash;  Message: 0% progress on ECUId:ICAM3_0x06 [0% of btld_00002c15-004_008_006] [TRANSACTION]
[] job failed with negative response error: 
 code: repeat job
 description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06
 severity: ERROR
 [THROWABLE]
[ICAM3 - 6 - btld_00002c15-004_008_006] Transaction type: blFlash;  Message: TA finished [TRANSACTION]
[ICAM3 - 6] -MessageID is used multiple times, so MessageText may be ambiguous-job failed with negative response error: 
 code: repeat job
 description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06
 severity: ERROR
 [WARN]
[ICAM3 - 6] - [Exception - ICAM3 - 6] job failed with negative response error: 
 code: repeat job
 description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06
 severity: ERROR

[ICAM3 - 6] prepareECUforBLUpdate started [PROGRESS]
[ICAM3 - 6] prepareECUforBLUpdate finished [PROGRESS]
[ICAM3 - 6] authenticateECUforBLUpdate started [PROGRESS]
[ICAM3 - 6] authenticateECUforBLUpdate finished [PROGRESS]
[ICAM3 - 6 - btld_00002c15-004_008_006] Transaction type: blFlash;  Message: TA started [TRANSACTION]
[ICAM3 - 6] performECUBLUpdate started with protocol UDS [PROGRESS]
MCDDiagService<id=56649, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUFlashBL, service=RC_EM_IE - RoutineControl EraseMemory IndicatedErasing, description=error: negative response : requestOutOfRange, link=ICAM3_06_ETHERNET_06> [DIAGSERVICE]
[ICAM3 - 6 - btld_00002c15-004_008_006] Transaction type: blFlash;  Message: 0% progress on ECUId:ICAM3_0x06 [0% of btld_00002c15-004_008_006] [TRANSACTION]
[] job failed with negative response error: 
 code: repeat job
 description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06
 severity: ERROR
 [THROWABLE]
[ICAM3 - 6 - btld_00002c15-004_008_006] Transaction type: blFlash;  Message: TA finished [TRANSACTION]
[ICAM3 - 6] There was an error during TAL execution, please check the log files. [WARN]
[ICAM3 - 6] - [Exception - ICAM3 - 6] job failed with negative response error: 
 code: repeat job
 description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06
 severity: ERROR

[ICAM3 - 6] installECUBL started [PROGRESS]
[ICAM3 - 6] installECUBL finished [PROGRESS]
[ICAM3 - 6] finalizeECUBLUpdate started [PROGRESS]
[ICAM3 - 6] finalizeECUBLUpdate finished [PROGRESS]
[] There was an error, please check the log files. [WARN]
[] - [Exception - ICAM3 - 6] job failed with negative response error: 
 code: repeat job
 description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06
 severity: ERROR

MCDDiagService<id=84900, job=com.bmw.psdz.jobs.common.MCD3_DeactivateProgModeNew, service=RDBI_FTP - ReadDataByIdentifier FlashTimingParameter, description=error: timeout, link=ICAM3_06_ETHERNET> [DIAGSERVICE]
[] finalizeVehicleFlash started [PROGRESS]
[] finalizeVehicleFlash finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "1min 3s". [C206]

Read SVT after TAL execution started.
Read SVT after TAL execution finished.

Read SVT before TAL execution started.

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
ExecutionID=2022/06/22-19:39:22.140
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForFlash started [PROGRESS]
[] prepareVehicleForFlash finished [PROGRESS]
[ICAM3 - 6] prepareECUforFlash started [PROGRESS]
[ICAM3 - 6] prepareECUforFlash finished [PROGRESS]
[ICAM3 - 6] authenticateECUforFlash started [PROGRESS]
[ICAM3 - 6] authenticateECUforFlash finished [PROGRESS]
[ICAM3 - 6 - swfl_00002c16-013_002_001] Transaction type: swDeploy;  Message: TA started [TRANSACTION]
[ICAM3 - 6] performEcuFlash started with protocol UDS [PROGRESS]
MCDDiagService<id=56649, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUFlash, service=RC_EM_IE - RoutineControl EraseMemory IndicatedErasing, description=error: negative response : requestOutOfRange, link=ICAM3_06_ETHERNET_06> [DIAGSERVICE]
[ICAM3 - 6 - swfl_00002c16-013_002_001] Transaction type: swDeploy;  Message: 0% progress on ECUId:ICAM3_0x06 [0% of swfl_00002c16-013_002_001] [TRANSACTION]
[] job failed with negative response error: 
 code: repeat job
 description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06
 severity: ERROR
 [THROWABLE]
[ICAM3 - 6 - swfl_00002c16-013_002_001] Transaction type: swDeploy;  Message: TA finished [TRANSACTION]
[ICAM3 - 6] -MessageID is used multiple times, so MessageText may be ambiguous-job failed with negative response error: 
 code: repeat job
 description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06
 severity: ERROR
 [WARN]
[ICAM3 - 6] - [Exception - ICAM3 - 6] job failed with negative response error: 
 code: repeat job
 description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06
 severity: ERROR

[ICAM3 - 6] prepareECUforFlash started [PROGRESS]
[ICAM3 - 6] prepareECUforFlash finished [PROGRESS]
[ICAM3 - 6] authenticateECUforFlash started [PROGRESS]
[ICAM3 - 6] authenticateECUforFlash finished [PROGRESS]
[ICAM3 - 6 - swfl_00002c16-013_002_001] Transaction type: swDeploy;  Message: TA started [TRANSACTION]
[ICAM3 - 6] performEcuFlash started with protocol UDS [PROGRESS]
MCDDiagService<id=56649, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUFlash, service=RC_EM_IE - RoutineControl EraseMemory IndicatedErasing, description=error: negative response : requestOutOfRange, link=ICAM3_06_ETHERNET_06> [DIAGSERVICE]
[ICAM3 - 6 - swfl_00002c16-013_002_001] Transaction type: swDeploy;  Message: 0% progress on ECUId:ICAM3_0x06 [0% of swfl_00002c16-013_002_001] [TRANSACTION]
[] job failed with negative response error: 
 code: repeat job
 description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06
 severity: ERROR
 [THROWABLE]
[ICAM3 - 6 - swfl_00002c16-013_002_001] Transaction type: swDeploy;  Message: TA finished [TRANSACTION]
[ICAM3 - 6] There was an error during TAL execution, please check the log files. [WARN]
[ICAM3 - 6] - [Exception - ICAM3 - 6] job failed with negative response error: 
 code: repeat job
 description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06
 severity: ERROR

[ICAM3 - 6] finalizeECUFlash started [PROGRESS]
[ICAM3 - 6] finalizeECUFlash finished [PROGRESS]
[] There was an error, please check the log files. [WARN]
[] - [Exception - ICAM3 - 6] job failed with negative response error: 
 code: repeat job
 description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06
 severity: ERROR

[] finalizeVehicleFlash started [PROGRESS]
[] finalizeVehicleFlash finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "1min 3s". [C206]

Read SVT after TAL execution started.
Read SVT after TAL execution finished.

[TheNine90]

First make sure the VIN is written to the module. Then when flashing select only swfl files. After that you can try flash remaining files

[larshutten]

This can be caused by bad camera.

[German80]

This can be caused by bad camera.

Cameras all working perfect all surround-view system working, even with coding error. ECU blue in ISTA  >>TRSVC ECU has programming abort!  

[Siki78]

Your FA is wrong and i step shipment is not 20-11-550

[DEJMIEN]

Did you solve the problem?

I have a similar problem as you, but my error appears at - SWFL_00002C17[MasterIO_SlaveNIO] I can not finish the flash, therefore the cameras do not work. Another thing is esys shows me that I need a SAS module for the 5DN option, according to the TIS wiring diagram at the g30 from 2018 with the bdc2 the SAS module is only needed for radar 5AT.  

Any ideas? would some damaged camera do that?

[yarickoff]

This can be caused by bad camera.

100%

[Node]

Did you solve the problem?

I have a similar problem as you, but my error appears at - SWFL_00002C17[MasterIO_SlaveNIO] I can not finish the flash, therefore the cameras do not work. Another thing is esys shows me that I need a SAS module for the 5DN option, according to the TIS wiring diagram at the g30 from 2018 with the bdc2 the SAS module is only needed for radar 5AT.  

Any ideas? would some damaged camera do that?

Don't know what your TIS says, bus according to KIS SAS is present when any of the following:
1. 5DN or 5DM along with automatic transmission
2. 5AT
3. 5DV
4. 5DF
are in the car.

IMHO SAS is the only unit capable of taking over control of your car. HOW is auto-parking supposed to work without it???

[sguzzel]

Flash should run without sas. do you have NBT evo or entry nav?

[DEJMIEN]

Flash should run without sas. do you have NBT evo or entry nav?

Exactly mate, I think so too, especially since fail is only at the very end.
All flash ran smoothly except for the except last swfl. Anyway I will retrofit sas module in this week.
Or
BTW car has already last software ilevel.
It’s EVO headunit mate.

---

Did you solve the problem?

I have a similar problem as you, but my error appears at - SWFL_00002C17[MasterIO_SlaveNIO] I can not finish the flash, therefore the cameras do not work. Another thing is esys shows me that I need a SAS module for the 5DN option, according to the TIS wiring diagram at the g30 from 2018 with the bdc2 the SAS module is only needed for radar 5AT.  

Any ideas? would some damaged camera do that?

Don't know what your TIS says, bus according to KIS SAS is present when any of the following:
1. 5DN or 5DM along with automatic transmission
2. 5AT
3. 5DV
4. 5DF
are in the car.

IMHO SAS is the only unit capable of taking over control of your car. HOW is auto-parking supposed to work without it???

You're right, I know what sas is for and what it does, but I thought that, as with the 5DL option in g11, it will not be needed.
Comparing the g11 with 360 cameras of the 5DL camera, there is no sas module and everything works. It is a pity that in g30 there is no 5DL. option